Instructions / Assembly

STYLE NO:
6023-9896-BB Laundry Valet
B 1 ea
Middle Vertical Tube
C 1 ea
Top Hanging Tube
A 1 ea
Bottom Frame
D 1 ea
Base Plate
E 2 ea
Feet
F 2 ea
Feet Cap Nuts
G 2 ea
Hex Screws
H 1 ea
Hex Wrench
No additional
tools required.
Part
Reference
A
B
C
D
E
F
G
H
F11907
F11908
F11909
F11910
F11911
F11912
F11913
F11728
STEP 1: Install the base plate (D) to the
bottom frame (A) using two hex screws
(G). Tighten with hex wrench (H). Screw
two feet (E) into the underside of the
base. Screw the foot cap nuts (F) onto
the ends of the feet (E).
STEP 2: Install the middle
vertical tube (B) and top
hanging tube (C).
NOTE: Top hanging
tube (C) can be
assembled in the
reverse direction
shown if desired.
STEP 3: Fit assembled laundry valet
under your washer or dryer and with
the magnets against the side. Adjust
the feet to fit snug.
Printed in China
8680 Swinnea Road • Suite 103 • Southaven, MS • 38671
NEED HELP? For help with assembly, or if you are missing a part,
please call Whitmor’s Consumer Care Team, 1-888-944-8667 between
8 a.m. and 4:30 p.m. (Central Standard Time) Monday through Friday.
Or email: help@whitmor.com. Visit us online at www.whitmor.com
Rev#2 | 12.9.21
A
B
C
D
E
G
G
F
F
E
©2021 Whitmor, Inc.

Summary of content (1 pages)