Assembly Instructions

6037-7037-GM 36-Pair Over the Door Shoe Rack ©2016 Whitmor, Inc.
A 14 ea
Horizontal pole
C 2 ea
Top vertical frame
with push tab
B 4 ea
Middle vertical frame
E 28 ea
Hex screw
H 1 ea
Mesh shelves
G 4 ea
End cap
D 2 ea
Bottom vertical frame
F 2 ea
Over the door bracket
I 1 ea
Hex wrench
Assembly Time:
Less than 30 minutes.
This product is for
shoe storage
Part Reference
A
B
C
D
E
F
G
H
I
F8409
F8410
F8411
F8412
F8413
F8414
F8415
F8416
F8417
Rev#0 6.09.16
STEP 1. Place one of each frame sections (C,D) and two of middle frame section (B) on a flat hard surface and clip together
with the push tabs. Attatch the horizontal poles (A) to frame sections using hex screws (E). Tighten with hex wrench (I).
Unfold the mesh shelves and install onto horizontal poles. Install over the door bracket (F), then end caps (G).
STEP 2. Clip together remaining frame sections (B,C,D) with the push tabs. Align assembled side frame section with
horizontal poles (A) using hex screws (E). Tighten with hex wrench (I). Install over the door bracket (F), then end caps (G).
STEP 3. Lift the
assembled shoe rack
and place over an
interior door.
NOTE: Make
sure the tag is at
the top of mesh
shelves. This tag
denotes the top
of the rack.
Printed in China
8680 Swinnea Road • Suite 103 • Southaven, MS • 38671
NEED HELP? For help with assembly, or if you are missing a part,
please call Whitmor’s Customer Service Department, 1-888-944-8667
between 8 a.m. and 4:30 p.m. (Central Standard Time) Monday
through Friday. Or email: [e-mail]
MADE IN CHINA
Tools Needed:
No additonal tools required.
Hex wrench provided.
C
F
G
F
G
G
G
E
E E E E E E
E
E
E E E E E E E E E E E
E
E E E E E E
E
B B D
A
H
A A A A A A A A A A A A
A
A
A A A A A A A A A A A A
H
C
B B D