Instructions / Assembly

ManualsBrandsWhitmor ManualsCloset Storage & OrganizationSupreme 36 in. H x 54 in. W x 14 in. D 4-Tier Wire Shelving Storage Center Rack in Black

A 32 ea

Sleeve

D 4 ea

Upper pole

E 4 ea

Lower pole

G 1 ea

Basket bottom

H 2 ea

Basket long side

I 2 ea

Basket short side

B 4 ea

Foot

C 3 ea

Shelf

Tools Needed: No tools required.

STEP 3. Connect upper pole (D) to lower pole (E) by

threading connector (F) into open end of the poles (there is

a small ridge in the middle of part (F) to gauge the

distance). Screw foot (B) into assembled pole at small

threaded end. Repeat step 3 for remaining poles.

STEP 4. Starting at the bottom (the

end with the small threaded hole, see

parts diagram), snap two sleeves (A)

onto poles at desired intervals. The

sleeves are marked with a

directional arrow to show proper

placement. Use grooves on poles to

ensure even shelf placement among

the four poles. NOTE: Place only

enough sleeves to assemble bottom

shelf. This step will be repeated for

each additional shelf.

STEP 1. Assemble the basket by installing two long

sides (H) to the bottom (G). Long sides (H) should lay on

the bottom (G), then be folded upward. See diagram and

note below.

STEP 2. With the long side frames (H) up in position,

insert the short side frames (I) under the downturned hooks

on (G). Pull up on the the short side frames (I) until the side

hook can be placed in positon to lock into (H)

NOTE: Look for the

protruding wires on the

bottom of (H). These wires

should fit into the upturned

hooks on (G).

NOTE: part D has a plastic cap on one end.

NOTE: part E has a small threaded hole on one end.

D F

D E

Assembly

Time:

Less than

30 minutes.

F 4 ea

Threaded connector

(may be already attached to D or E)

This product's intended

use is for storage in all

environments in a home or

commercial setting. The

shelf capacity is 350 lbs.

and basket capacity is 250

lbs. when weight is evenly

distributed.

Summary of content (2 pages)

PAGE 1
6070-7205 Supreme Storage Center - Black ©2016 Whitmor, Inc. Assembly Time: Less than 30 minutes. A 32 ea B 4 ea D 4 ea NOTE: part D has a plastic cap on one end. E 4 ea NOTE: part E has a small threaded hole on one end. Sleeve Upper pole Lower pole Foot This product's intended use is for storage in all environments in a home or commercial setting. The shelf capacity is 350 lbs. and basket capacity is 250 lbs. when weight is evenly distributed. Tools Needed: No tools required.
PAGE 2
6070-7205 Supreme Storage Center - Black STEP 5. Slide poles with plastic cap on top through shelf corners until shelf rests firmly on sleeves. Push or gently tap the shelf down at corners to level shelf. Repeat steps 4 and 5 for the basket, then each additional shelf. Turn feet (B) to level unit. ©2016 Whitmor, Inc. NOTE: Follow this diagram for shelf and basket order.