Assembly Instructions

ManualsBrandsWhitmor ManualsCloset OrganizersGunmetal Covered Closet

8680 Swinnea Road • Suite 103 • Southaven, MS • 38671

MADE IN CHINA

NEED HELP? For help with assembly, or if you are missing a part,

please call Whitmor’s Consumer Care Team, 1-888-944-8667 between

8 a.m. and 4:30 p.m. (Central Standard Time) Monday through Friday.

Or email: help@whitmor.com. Visit us online at www.whitmor.com

Rev.1 | 07.27.17 Printed in China

STEP 5. Install four top female vertical tubes (G)

and two top female center vertical tubes (I) onto

bottom male vertical tubes (F&H). Install one

horizontal support tube (E) between the two

vertical tubes (I) and attach with two hex screws

(M) Tighten with hex wrench (Q).

STEP 6. Assemble male and

female horizontal tubes (C&D) then

assemble two top end tubes (B) by

pressing together.

STEP 7. Assemble

male and female

hanging tubes (J&K).

Assemble two

hanging tube hooks

(O) using two flat

head screws (N).

STEP 8. Attach the

assembled top

section from step 6

to the top of the

frame using six hex

screws (M). Hang the

assembled hanging

tubes from step 7

over the top of the

frame.

Part Reference

F9339

F9338

F9343

F9342

F9348

F9341

F9340

F9345

F9344

Part Reference

F9346

F9347

F9350

F9349

F9399

F9400

F9351

F9401

STEP 9. Lift the cover (P) up over

the top of the frame, carefully fitting

the corners of the cover over the

top corners of the frame. Slide the

bottom of the cover downwards

evenly to the base of the frame.

STEP 10. Zip up the cover front

and the assembly is complete.