Instructions / Assembly

6422-8857-WHT-BB 6-Cube Organizer - White ©2018 Whitmor, Inc.
Page 2
Step 1: Insert dowels (J) into the inside predrilled holes in the
shelf ends (2 & 3). Insert dowels (J) into the end of middle dividers
(4). Insert two long dowels (C) into holes in a center shelf (2). Long
dowels should be pushed completely through the holes in shelf
with equal distance showing on both sides. Align the dowels with
the holes in two middle dividers (4) and press together.
Step 2: Insert two long dowels (C) into holes in the remaining
center shelf (2). Long dowels should be pushed completely
through the holes in shelf with equal distance showing on both
sides. Align the dowels with the holes in the assemled section from
step one with the remaining middle divider (4) and press together.
J
J
J
J
J
J
J
J
J
J
2
2
3
4
4
4
C
C
C
C
4
2
SAFETY PRECAUTIONS:
WARNING
• This unit contains small parts which could
be a choking hazard for small children.
Children should be under adult supervision at
all times or serious injury could occur.
• Always unload unit prior to moving the
unit. The weight of personal belongings can
cause the unit to become unstable and either
tip or collapse. Serious bodily injury and/or
damage to personal belongings may occur.
• Do not overload unit. If any shelf, top, or
bottom of unit bows or bends, it is overloaded.
The shelf, top, or bottom could collapse and
cause serious bodily injury and/or damage to
personal belongings.
• Do not climb or step on the unit. The unit
may become unstable and either tip or
collapse. Serious bodily injury and/or damage
to personal belongings may occur.
• Do not mount or attach anything to the
sides, rear or front of the unit as this can
create a force which can cause the unit to tip.
Serious bodily injury and/or damage to
personal belongings may occur.
• Do not hang this unit on the wall. The
product structure is not designed for wall
hanging. Serious bodily injury, damage to
personal belongings, and/or damage to the
wall may occur.
• All units must be secured individually to a
wall stud using the included safety strap and
screws. If wall stud is not accessible consult
your local hardware store for appropriate
mounting hardware. Failure to do so may
create an unsafe tipping hazard that could
lead to serious bodily injury and/or damage to
personal belongings.
• Follow proper safety procedures when
using power tools and ladders (when
applicable).
• We recommend you protect your work
surface during assembly to prevent scratching
or damage to table tops, wood floors, etc.