Assembly Instructions

6640-4794 Easy-Lift™ Triple Sorter ©2014 Whitmor, Inc.
A 1 ea
Side frame left
B 1 ea
Side frame right
C 1 ea
Back leg left
D 1 ea
Back leg right
E 2 ea
Horizontal tube
F 1 ea
Bag hinge
G 1 ea
Handle
J 3 ea
Bag frame
K 2 ea
Wheel
L 2 ea
Wheel with lock
I 3 ea
Sorter bag
M 1 ea
Hex wrench
Assembly
Time:
Less than
45 minutes.
This product's intended
use is for sorting
garments and laundry
Tools Needed:
No additional tools required.
Hex wrench provided.
MADE IN CHINA
Part Reference
A
B
C
D
E
F
G
H
I
J
K
L
M
F7900
F7901
F7902
F7903
F7904
F7905
F7906
F7907
F7908
F7909
F7910
F7911
F7912
8680 Swinnea Road • Suite 103 • Southaven, MS • 38671
NEED HELP? For help with assembly, or if you are missing a part,
please call Whitmor’s Customer Service Department, 1-888-944-8667
between 8 a.m. and 4:30 p.m. (Central Standard Time) Monday
through Friday. Or email: [e-mail]. Visit us online at
www.whitmor.com
Rev.#0 | 4.29.14 Printed in China
STEP 1. Assemble the left and right back legs
(C&D) to left and right side frames (A&B).
STEP 2. Assemble the horizontal tubes (E) to
the assembled side frames using four hex screws
(H). Tighten with provided hex wrench (M).
STEP 3. Assemble the bag hinge (F) between
the assembled side frames and use the two
remaining hex screws (H) to secure. Tighten with
provided hex wrench (M).
STEP 4. Insert the handle (G) onto top of the
assembled frame.
STEP 5. Press wheels (K&L) into bottom of
side frames.
STEP 6. Open sorter bags (I). The handles
have velcro closures. Open the handles, then
insert the bag frames (J) wrapping the handles
around the long sides of the frames. Close the
velcro. Insert the bag frames under the wire
hinges on the bag hinge (F)
NOTE. Metal frame parts have holes
in them for hex screws to be inserted.
Notice the indented side of the hole is
the side that the screw head fits into.
J
J
I
I
I
J
D
C
E
K
L
L
K
E
F
G
H 6 ea
Hex screw
B
A
H
H
H
H
H
H
NOTE. Part (F)
should be assembled
with the wire hinges
facing to the back.