Assembly Instructions

6764-9965 Modern Industrial Entry Bench © 2019 Whitmor, Inc.
Tools Needed:
No additional
tools required
Printed in China
8680 Swinnea Road • Suite 103 • Southaven, MS • 38671
NEED HELP? For help with assembly, or if you are missing a part,
please call Whitmor’s Consumer Care Team, 1-888-944-8667 between
8 a.m. and 4:30 p.m. (Central Standard Time) Monday through Friday.
Or email: [e-mail]. Visit us online at www.whitmor.com
Rev#1 3.11.19
A 2 ea
Side frames
G 1 ea
Hex wrench
C 2 ea
Horizontal tubes
E 8 ea
Long hex screws
F 6 ea
Short hex screws
B 1 ea
Shelf
D 1 ea
Top
Part Reference
A
B
C
D
E
F
G
F10130
F10131
F10132
F10133
F10134
F10135
F10136
STEP 1: Attach the shelf (B) and two horizontal tubes (C) to two side frames (A) using eight long hex screws (E). Tighten with
hex wrench (G).
STEP 2: Install the top (D) onto the horizontal tubes (C) and secure using six short
hex screws (F). Tighten with hex wrench (G).
A
C
B
C
G
F
D
NOTE: Correct orientation of the
wire shelves is the thinner wire
towards the top of the unit.
A
E
G