Instructions / Assembly

6822-167-PG-BB Extra-Wide Clothes Closet ©2019 Whitmor, Inc.
B 4 ea
Female tubes
G 1 ea
Cover
C 4 ea
Male tubes
F 1 ea
Male rod
D 6 ea
Vertical tubes
Part Reference
A1
A2
B
C
D
E
F
G
F9376
F9377
F9378
F9379
F9380
F9381
F9382
F9383
Recommended: 2 people assembly. Tools Needed: No tools required.
Bottom frame assembly: Insert
two female tubes (B) into the holes
on the side (see image above).
Then place the other side of the
female tubes (B) through the holes
on the stickered side of the center
support (A2). Insert two male
tubes (C) into the center support
(A2) where the tubes intersect.
Place another side support (A1)
onto the ends of the tubes.
STEP 1: Insert the tapered side of
each vertical tubes (D) into bottom
frame. Unfold and straighten the
vertical tubes (D).
STEP 3: Unzip the zippers. Allow the top of the
cover fall back revealing the ends of the vertical
tubes (D). To install assembled top frame - make
sure female tubes (B) on the top frame are above
female tubes (B) on the bottom frame. Starting from
one end press down on each tube firmly to attach
top frame.
Wrap the elastic loop
around the leg to keep
the cover in place
STEP 4: Lift cover up over the top of the frame,
carefully fitting the corners of the cover over the
top corners of the frame. Slide the bottom of the
cover downwards evenly to the base of the frame.
E 1 ea
Female rod
A1 4 ea
Side supports
NOTE: All metal parts must be
inserted firmly and completely into the
plastic parts.
Top frame assembly: Insert two
female tubes (B) into the side
support (A1). Insert the female rod
(E) into the center of side support
(A1). Then place the other side of
the female tubes (B) and female
rod (E) through the holes on the
stickered side of the center support
(A2). Insert two male tubes (C) and
the male rod (F) into center support
(A2) where tubes intersect. Place
another side support (A1) onto the
ends of the tubes.
C
C
B
B
C
B
B
D
D
A2 2 ea
Center supports
A1
A1
A2
B
B
C
C
A1
C
C
F
A1
A2
B
B
E
Printed in China
8680 Swinnea Road • Suite 103 • Southaven, MS • 38671
NEED HELP? For help with assembly, or if you are missing a part,
please call Whitmor’s Consumer Care Team, 1-888-944-8667 between
8 a.m. and 4:30 p.m. (Central Standard Time) Monday through Friday.
Or email: [e-mail]. Visit us online at www.whitmor.com
Rev#1 3.19.19
STEP 2: Unfold the cover, note the
placement of six holes in the
bottom of the cover. Carefully fit the
holes over the vertical tubes (D).
NOTE: do not slide the cover all the
way down.
D
C