Assembly Instructions

6905-5955 Steel Gray Double Rod Closet ©2015 Whitmor, Inc.
L 1 ea
Cover
Part Reference
A
B
C
D
E
F
G
H
I
J
K
L
M
F8088
F8152
F8090
F8153
F8092
F8093
F8094
F8095
F8096
F8097
F8098
F8154
F8100
Assembly Time:
Less than 1 hour.
This product's intended
use is for storing clothes.
Tools Needed:
No additional tools required. Hex wrench (L) provided.
STEP 1. Assemble the bottom shelf (A) to four
bottom vertical tubes with push tabs (B). Insert
plastic spacers (K) and use four long hex screws
(I) to secure. Tighten with hex wrench (M).
STEP 3. Hang a tube bracket
(H) on each short horizontal
tube (E) at the crimp. Place a
center hanging tube (G)
between the brackets and
secure with hex screws (J).
STEP 4. Open the cover (L) and
unzip the clear front. Work the cover
over the top of the assembled closet
frame aligning the top. Make sure
the clear front panel is at the front
open side of the frame. Find the ties
on the inside lower front of the cover
and tie these to the lower front
corner of the frame (see diagram).
Zip the cover closed.
STEP 2. Assemble the top section by inserting top front and back
vertical tubes (C) and (D) into bottom vertical tubes with push tabs
(B). Install four short horizontal tubes with crimp (E) between tubes
(C) and (D) using plastic spacers (K) and hex screws (I). Tighten
with hex wrench (M). Install three long horizontal tubes (F), two in
back and one in front. Use plastic spacers (K) and hex screws (I).
Tighten with hex wrench (L).
A 1 ea
Bottom shelf
B 4 ea
Bottom vertical tube with push tab
F 3 ea
Long horizontal tube
G 2 ea
Center hanging tube
J 4 ea
.88” Short hex screw
K 18 ea
Plastic spacer
M 1 ea
Hex wrench
C 2 ea
Top front vertical tube
D 2 ea
Top back vertical tube
E 4 ea
Short horizontal tube with crimp
8680 Swinnea Road • Suite 103 • Southaven, MS • 38671
MADE IN CHINA
NEED HELP? For help with assembly, or if you are missing a part,
please call Whitmor’s Customer Service Department, 1-888-944-8667
between 8 a.m. and 4:30 p.m. (Central Standard Time) Monday
through Friday. Or email: help@whitmor.com. Visit us online at
www.whitmor.com
Rev.1 | 02.09.15 Printed in China
A
B
B
B
I
I
I
I
K
I
I
I
I
I
I
I
I
I
I
I
I
I
K
K
K
K
I
B
H 4 ea
Tube bracket
I 18 ea
1.25” Long hex screw
C
D
E
E
E
F
G
H
H
H
J
J
J
J
H
G
F
F
E
C
D
K
K
K
K
K
K
K
L
L

Summary of content (1 pages)