Assembly Instructions

ManualsBrandsWhitmor ManualsCloset OrganizersGunmetal 2-Rod Garment Rack

Assembly

Time:

Less than

30 minutes.

This product's intended

use is for garment storage.

Tools Needed:

No extra tools required.

MADE IN CHINA

Printed in China

8680 Swinnea Road • Suite 103 • Southaven, MS • 38671

NEED HELP? For help with assembly, or if you are missing a part,

please call Whitmor’s Consumer Care Team, 1-888-944-8667 between

8 a.m. and 4:30 p.m. (Central Standard Time) Monday through Friday.

Or email: help@whitmor.com. Visit us online at www.whitmor.com

Rev#1 5.10.17

A 2 ea

Base

C 2 ea

Bottom vertical tube

D 2 ea

Upper vertical tube

F 1 ea

Middle hanging tube

E 1 ea

Top hanging tube

G 4 ea

Wheel

H 2 ea

Long hex screw

I 2 ea

Medium hex screw

J 4 ea

Short hex screw

B 2 ea

Horizontal base tube

K 1 ea

Hex wrench

STEP 1. Attach two horizontal base tubes (B) to two

bases (A) with four short hex screws (J). Tighten with

hex wrench (K).

STEP 2. Attach two bottom vertical tubes (C) to the

bases (A) with two long hex screws (H). Tighten with

hex wrench (K).

STEP 3. Insert two upper vertical tubes (D) into the

bottom vertical tubes (C). Insert the middle hanging

tube (F) between the vertical tubes and line up with the

holes. Attach (D,C,F) with two medium hex screws (I).

Tighten with hex wrench (K).

STEP 4. Place the top hanging tube (E) onto the upper

vertical tubes (D).

STEP 5. Insert the four wheels (G) into the bases (A).

Part Reference

F9294

F9299

F9295

F9296

F9297

F9298

F7011

F8617

F9300

F8616

F8644