Assembly Instructions

Please do not tighten the hardware until the entire assembly is completed.
J
1
3
3
2
5
6
3
4
4
TRUNDLE
FULL SET
ASSEMBLY
COMPLETE
Assembly by tracing around the Castors (15)
onto the Slats Support (14). Secure Castors (15)
to Slats Support (14) using 4 Screws (F)
per castor.
Tighten screws with Phillips screwdriver
(NOT INCLUDED)
Begin with attaching Trundle Side Rail (12) to Front Rail (10)
& Back Rail (11) using 2 Bolts (A) per corner.
Tighten bolts with Allen Key (I) provided.
Attach Slat Support (14) to Front Rail (10)
& Back Rail (11) using 2 Bolts (B),
2 Spring Washers (C) and 2 Flat
Washer (E) on each end of each
Slat Support (14). Tighten bolts with
Allen Key (H).
Attach Slat (13) to Front Rail (10) & Back
Rail (11) using 4 Screws (G) per set.
Tighten screws with Phillips screwdriver
(NOY INCLUDED)
STEP 8
STEP 10
STEP 9
STEP 11
12
10
11
12
A
I
12
10
14
12
11
15
14
F
12
10
12
14
H
B
C
E
10
13
13
G