Assembly Instructions

ASSEMBLY INSTRUCTIONS
HARDWARE LIST
ITEM DESCRIPTION
QTY
1
JCBC Bolt M6 x 50mm
4pcs
2 M6 SPRING WASHER
4pcs
3
WOOD SCREW M4 x 38
8PCS
4
M4 ALLEN KEY (BALL SHAPE)
1PC
5 WOOD DOWEL M8 x 30mm
8PCS
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver & Hammer (not provider).
PART LIST
ITEM DESCRIPTION
QTY
A
CUSHION SEAT
1 PC
B
LEG SUPPORT 2 PCS
C
LEG
2 PCS
STEP 1
STEP 2
1 OF 2
2
1
4
5
B
B
C
1.1 Open the zip at the bottom of cushion seat and take out all part hardware.
B