Manualshelf

Assembly Guide

ManualsBrandsWholesale Interiors ManualsChairsBBT8051-TAN/WALNUT-CC Baxton Studio Arvid Mid-Century Modern Tan Faux Leather Upholstered and Walnut Brown Finished Wood Dining Chair
12
ASSEMBLY INSTRUCTIONS
MODEL : BBT 8051 (1 SEATER)
HARDWARE LIST
ITEM DESCRIPTION
QTY
1 JCBC Bolt M6 x 50mm
4pcs
2 JCBC Bolt M8 x 45mm
4pcs
3 M8 FLAT WASHER
4pcs
4 M6 SPRING WASHER
4pcs
5
M8 SPRING WASHER
4pcs
6
WOOD SCREW M4 x 38
6PCS
7
M4 ALLEN KEY (BALL SHAPE)
1PC
8
M5 ALLEN KEY (BALL SHAPE)
1PC
9 WOOD DOWEL M8 x 30mm
8PCS
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver & Rubber Mallet (not provider).
PART LIST
ITEM DESCRIPTION
QTY
A
CUSHION BACK 1 PC
B
CUSHION SEAT 1 PC
C
LEG SUPPORT FRONT
1 PC
D
LEG SUPPORT BACK
1 PC
E
LEG LEFT 1 PC
F
LEG RIGHT
1 PC
STEP 1
STEP 2
1 OF 2
C
C
E
4
1
7
A
B
A
8
2
5
3
D
D
F
L
R
9
1.1 Open the zip at the bottom of
cushion seat and take out all part
hardware.
FRONT
BACK

Summary of content (2 pages)