RH378C. 5PC Dining Set. Upholstered

ManualsBrandsWholesale Interiors ManualsDining Room SetsKatya Collection RH378C-GREY/WALNUT-5PC DINING SET Mid-Century Modern Gray Fabric Upholstered and Walnut Brown Finished Wood 5-Piece Dining Set

ASSEMBLY INSTRUCTION MODEL : 378C

Read this instruction carefully. Remove all wrapping material, staples and straps from the carton.

See hardware and furniture part list

For guidance. Be sure you have all wooden furniture parts on a clean and flat soft surface, such as

a carpet or rug, to prevent from being scratched.Follow the figure to start assembling.

CAUTION :

1. Do not FULLY - TIGHTEN the nut or screw untill all is ready to assemble.

2. Do not OVER - TIGHTEN the nut or screw to avoid causing damages to the thread.

3. Keep all hardware part out reach of children.

COMPELETE

ASSEMBLE

STEP 4

PART LISTNO QTY

BACK REST

FRONT LEG

SIDE RAIL 2 PCS

BENT CUSHION SEAT 1 PC

1 PC

DESCRIPTIONNO

QTY

JCBC SCREW M6 X 50MM

2 PCS

SPRING WASHER

6 PCS

M4 ALLEN KEY 1 PC

CSK SCREW M4 x 30MM

WOOD DOWEL Ø8 x 30MM

4 PCS

JCBC SCREW M6 X 70MM

4 PCS

CENTER SUPPORT 1 PC

WOOD BUTTON

4 PCS

STEP 1.1

Firstly, stick E to C for both left and

right side.

STEP 1.2

Then, attached STEP 1.1 to B

according to the hole and tighten it

using hardware number 2,3,4 and 6.

STEP 2

Continued with combine the whole

part from STEP1.2 to A . Tighten the

part of C and A using hardware

number 3,1 and 6 . Then cover the

hole with F.

STEP 3

Stick D to the whole assemble part

and fully-tighten it with hardware

number 5 .

CUSHION

SEAT

5 X 4PCS

Summary of content (2 pages)

PAGE 1
ASSEMBLY INSTRUCTION MODEL : 378C Read this instruction carefully. Remove all wrapping material, staples and straps from the carton. See hardware and furniture part list For guidance. Be sure you have all wooden furniture parts on a clean and flat soft surface, such as a carpet or rug, to prevent from being scratched.Follow the figure to start assembling. CAUTION : 1. Do not FULLY - TIGHTEN the nut or screw untill all is ready to assemble. 2.
PAGE 2
ASSEMBLY INSTRUCTION MODEL : 7206T Read this instruction carefully. Remove all wrapping material, staples and straps from the carton. See hardware and furniture part list For guidance. Be sure you have all wooden furniture parts on a clean and flat soft surface, such as a carpet or rug, to prevent from being scratched.Follow the figure to start assembling. CAUTION : 1. Do not FULLY - TIGHTEN the nut or screw untill all is ready to assemble. 2.