ASSEMBLY INSTRUCTIONS SE DV 50140W1 Thank you for you purchase. Before assembly, please read these instructions. Please read all warnings. Store this instruction manual for future reference. Product Size Approximately 370 Width x 1200 Length x 1550 Height (MM) Main y a Materials MOF {Medium Density Fiberboard)} Weight Top insert: About 20KG, Shelf insert: About 2086, Capacity X These are measured figures, not guaranteed figures, Time To Miserably.
Parts 15 dst Shelf Panel 1Pc 2) 2nd Shelf Panel 1Pc 3rd Shelf Panel 1Pc 4th Shelf Panel 1Pc Bottom Panel 1Pc 1st Support Panel 2 Pcs 2nd Support Panel 2 Pcs Support Panel PCs Front Long Leg + Frame Panel 1Pc )) Back Long Leg Frame Panel 1Pc r Short Leg Frame PCs Assembly Information = Assemble screws Assemble Wood Dowels = Assemble Mini fix 1. Screw up to half pain: to make sure all spots are lined up . Insert dowels into holes tightly 1. Screw Up Mini fix M3X24MM into holes. Tighten all Mini fix. ¢ ~ .
Assembly Step Failure to follow these directions could cause poor strength or stability, Insert screws lose to line up with slots then tighten up each screw.
Safety Please read the below warnings before use. Failure to follow these warnings could result in serious injury. CAUTION H1 Purpose = Do not ise this unit except for original application = This unit is for household use. Do not use it for wholesale. = This unit is for indoor use. Do not use it outside.
-~Part include CANTETIP™ 4 WITH ANTE TIP Installation Instruction : A tip restraint must be attached to a wall stud using the 27 screw sh closed. Attach a strap to the back top ral or back top edge of the furniture using the 5/8" screw provided. Locate the strap on the wall over a wall stud. and 2 inches. below. the mounting strap secured to the back of your uni. Attach to the wall stud using the 2" screw provided, through the smaller-hole.