User Manual

4-8-2016

MASTER

SLAVE

SLAVE 1 SLAVE 3SLAVE 2

MASTER

MS-PAE INVERTERS STACKED

PT-100 CONTROLLERS STACKED

ME-RTR

BTS to

Battery

Bank

NETWORK

Cable

NETW ORK

BTS

REMOT E

Stacking cables

Remote

cables

Stacking cables

BTS

Cable

NETWORKING STACKED PT-100'S WITH STACKED INVERTERS

Stack

(red)

Magnum Net

(green)

Remote

(blue)

BTS

(yellow)

Communication

Ports

CAUTION: Do not network any PT-100 directly to the ME-RTR or damage may occur.

Note: A phone-splitter can not be used in any configuration that has the ME-RTR installed.

PAGE 1
NETWORKING STACKED PT-100'S WITH STACKED INVERTERS Stacking cables ME-RTR Remote cables REMOTE SLAVE 3 REMOTE SLAVE 2 REMOTE SLAVE 1 NETW ORK REMOTE MASTER BTS MS-PAE INVERTERS STACKED NETWORK Cable BTS Cable MASTER BTS to Battery Bank SLAVE SLAVE SLAVE Stacking cables Sta ck (red) Magnum Net (gre en) Remote (blue) BTS (yellow) Communication Ports NETW ORK PT-100 CONTROLLERS STACKED CAUTION: Do not network any PT-100 directly to the ME-RTR or damage may occur.
PAGE 2
Networking the PT-100 with Other Network Devices (Daisy Chain Configuration) Magnum Inverter/charger ME-ARC (ADVANCED REMOTE) PT-100 (CHARGE CONTROLLER) ME-BMK (BATTERY MONITOR) ME-AGS-N (NETWORK AGS) 2-way Phone-splitter 2-way Phone-splitter Note: The ME-AGS-N or PT-100 must be the first network device connected to the inverter, followed by the ME-BMK, and whatever device wasn’t used as the first network device (ME-AGS-N or PT-100) is connected after the ME-BMK.
PAGE 3
Networking the PT-100 with Other Network Devices (Star Configuration using two 2-way splitters) ME-ARC Magnum Inverter/charger PT-100 (CHARGE CONTROLLER) (ADVANCED REMOTE) Two 2-way Phone-splitters ME-BMK (BATTERY MONITOR) ME-AGS-N (NETWORK AGS) Networking the PT-100 with Other Network Devices (Star Configuration using a 3-way splitter) ME-ARC Magnum Inverter/charger (ADVANCED REMOTE) ME-BMK (BATTERY MONITOR) ME-AGS-N (NETWORK AGS) 3-way Phone-splitter 4-8-2016