Specification

9
CONTROL PANEL
Power Button
Press to turn the air conditioner on and off
Mode Button
Press to change mode
• Controls the 3 function modes: COOL, FAN, and DRY.
Up ( + ) and Down ( - ) Buttons
Adjusts set temperature (1°C/ 2°F increments) or timer hours (0 – 24 hours).
 This unit is capable of displaying set temperature in Fahrenheit or in Celsius.
To convert from one to the other, press and hold the Up and Down buttons for 3 seconds.
LED Display
• In Cool mode: shows set temperature in °C or °F and AUTO timer setting.
• In DRY and FAN only modes: shows room temperature.
Error Codes:
 E1 - Room temperature sensor error
- Unplug unit and restart in 5 minutes
 E2 - Evaporator sensor error
- Unplug unit and restart in 5 minutes
 E3 - Condenser sensor error
- Unplug unit and restart in 5 minutes
 E4 - Display panel sensor error
- Unplug unit and restart in 5 minutes
 P1 - Water reservoir full
- Drain water from the unit
Power Indicator Light
Timer mode indicator light
(set only by remote control)