Specification

5
ELECTRICAL REQUIREMENTS
Before you move your upright freezer into its final location, it is important to make sure you have the
proper electrical connection:
A standard electrical supply (115V, 60Hz, 10A), properly grounded in accordance with the
National Electrical Code and local codes and ordinances, is required.
It is recommended that a separate circuit, serving only your upright freezer, be provided. Use
receptacles that cannot be turned off by a switch or pull chain.
The fuse (or circuit breaker) size should be 10 amps.
Recommended grounding method
For your personal safety, this appliance must be grounded. It is equipped with a power supply cord
having a 3-prong grounding plug. To minimize possible shock hazard, the cord must be plugged into a
mating 3-pronged and grounding-type wall receptacle, grounded in accordance with the National
Electrical Code and local codes and ordinances.
Technical Information
Voltage
115V
Frequency
60Hz
Input Power
79W
Refrigerant
R600a
Unit Temperature Range
-1°- °F
Operating Temperature Range
60 - 85°F
Rated Current
1.1A
Volume
1.1 cu. ft.
Weight
42 lbs.
Unit Dimensions
+[:["'
Control Type
Mechanical
Defrost Type
Manual
Lock
Yes
Cabinet Shelves (Total)
1
NOTE: Technical data and performance information provided for reference only. Specifications are
subject to change. Check the rating label on the upright freezer for the most accurate information.
Electrical Shock Hazard
Plug into a grounded 3-prong outlet.
Never remove the grounding prong from th
e plug.
We strongly recommend against the use of an extension cord. However, if
you must use an extension cord, it is absolutely necessary that it be a
UL
-listed 3-
wire grounding type appliance extension cord having a grounding
type plug and outlet and that the electrical rating of the cord be 15 amperes
(minimum) and 120 volts.
Failure to follow these instructions can result in fire, electrical shock, or death.