QUICK START USER GUIDE Wi AudioStream TM DIGITAL T WIRELES S T E R E O TM w w w.widigitalsystems.
Charging 1. Plug the AC Charger into a power socket. 2. Connect the USB Y-Split power cable to the USB port on the AC charger. 3. Connect one of the two mini USB connectors into the transmitter USB port. 4. Connect the second mini USB connector to the receiver USB port. 5. The Power/Status LED will turn to solid Red ON. 6. When charging is complete the Red LED will turn OFF. 7. Remove the charging cable and adapter and store in the carrying case. The battery will last 4 to 6 hours of continuous operation.
Powering & Pairing 1. First turn ON the transmitter (Tx) and the receiver (Rx) units by pressing and holding the POWER button , on each of the units for 2 seconds. 2. Press and hold the LINK button on the transmitter (Tx) for 3 seconds. The Power/ Status LED on the transmitter will start flashing. The transmitter is now in a Pairing mode and ready to search for receivers. 3. Press and hold the LINK button on the receiver (Rx) for 3 seconds. The Power/ Status LED on the receiver will start flashing.
Wireless Microphone Setup PLEASE S READ FIRST S Set Transmitter to Mono Mic-in Mode (fast blue LED flashing) for operation with ear worn microphones. Refer to back of transmitter for additional information. (Tx) Transmitter Connection Audio Input Jack (Tx) Audio Cable Ear-Worn Microphone Belt Clip Always route the audio cable beneath Tx & Rx belt clip to prevent accidental disconnection.
In-Ear Monitoring Setup PLEASE READ FIRST Set Transmitter to Line-in Stereo Mode (two blue LED flashes) for operation with earphones (factory setting.) Refer to back of Transmitter for additional information.
QUICK START USER GUIDE TM Wi AudioStream TM © 2011 Wi Digital Systems by Jangus Music, Inc. All rights reserved. Wi, Stylized Wi and Jangus Music Logos are registered trademarks of Jangus Music, Inc. in the United States and may be registered trademark or trademarks in other countries. Wi AudioStream, and Digital Wireless Stereo logo are trademarks of Jangus Music, Inc. All other trademarks included herein are the property of their respective owners. US and Foreign Patents Pending.
WiAS Transmitter 1. Audio IN Jack 7. Link/Pairing 2. Power ON/OFF 8. Sleep 3. Power/Status LED 9. Operation Mode 4. Volume UP 10. USB Charging Port 5. Volume Down 11. Belt Clip 6.
Transmitter Button Function Function Button Hold LED Status Power ON/OF POWER 2 sec Pairing Mode LINK 3 sec Signal Routing LINK Click Volume UP Click Volume Down Mute ON/OFF 1.
WiAS Receiver 1. Audio OUT Jack 7. Next Track 2. Power ON/OFF 8. Previous Track 3. Power/Status LED 9. Mute/ Play/Pause 4. Volume UP 10. (VoIP) Microphone 5. Volume Down 11.USB Charging Port 6. Link/VoIP 12.
Receiver Button Function Function Button Hold LED S Status Power ON/OF POWER 2 sec Solid Green Pairing Mode LINK 3 sec Fast Green Flash VoIP MIC Click Solid Green LED & 2 Blue LED Flashes VoIP Volume UP Volume Down Click Mute ON/OFF 1.
