J M-WA L 45 USER G U I D E TM Wi AudioStream TM Digital Wireless Mini Mic & Audio Monitoring System DIGITAL WIRELES S T E R E O TM
Wi AudioStream CONGRATULATIONS CONGRATULATIONS! Thank You For Choosing Jangus Music! Congratulations on your purchase of the Wi AudioStream Digital Wireless Mini Mic & Audio Monitoring System. In this manual you’ll find information designed to help you understand the capability of your Wi AudioStream, as well as step-by-step explanation on how to install and operate your Wi AudioStream digital wireless Mini Mic and audio monitoring System.
Wi AudioStream TECHNICAL SUPPORT Getting Answers! We want you to get the most from your new Wi AudioStream digital wireless mini Mic and audio monitoring system! Simply logon to www.jangusmusic.com and access the powerful resources available online including instructional manuals and frequently asked questions. Our customer service staff is ready to assist you with any question you may have. Your Wi AudioStream comes with 90 days of telephone support and one year of service coverage.
Wi AudioStream INTRODUCTION Making Great Instruments Better! Jangus Music’s Wi AudioStream world class, linear stereo digital wireless audio solution is the smallest, most advanced cable replacement technology available today that can fit in the palm of your hand! This Patents-Pending plug-and-play stereo digital wireless audio solution provides an easy and user friendly way to connect any professional mini condenser microphones or analog audio device to remote and hard to reach audio equipment.
Wi AudioStream INTRODUCTION Crisp Highs and Thundering Low Tones! The Wi AudioStream’s 15Hz to 20kHz frequency response covers the full harmonic spectrum of musical instruments including Keyboards, Singing Voices, Woodwinds, Brass, Percussion and Strings; and delivers crisp highs and thundering low tones that will satisfy the most demanding musicians.
Wi AudioStream INTRODUCTION Extreme Flexibility! The Wi AudioStream power source’s flexible design boasts an internal rechargeable battery for 4~6 hours of battery operation. The optional ON-THE-GO AA battery power adapter provides for 10~13 hours of extended battery operations and the AC power adapter provides continuous operation, so there’s no need to power down the Wi AudioStream for recharging or swapping the AA batteries on the optional ON-THE-GO battery power booster.
Wi AudioStream INTRODUCTION Rx 3 Creating Your Audio Matrix! Jangus Music’s audio routing feature allows users to send the audio output from their instrument to up to eight (8) different digital wireless receivers with a simple press of the Link button. You can send the audio signal to other receivers as well as the Jangus Music’s JM-WHM01 digital wireless headphone.
Wi AudioStream PACKING LIST What is included in the package? w w w. j a n g u s m u s i c . c o m Verify that you have received all of the items listed below. Please visit our web site at www.jangusmusic.com for additional accessories.
Wi AudioStream ABOUT YOUR JM-WAL45 Wi Transmitter 1. Audio IN Jack 2. Power ON/OFF 3. Power/Status LED 4. Volume UP 5. Volume Down 6. Mute 7. Link/Pairing 8. Sleep 9. Operation Mode 10. USB Charging Port 11. Belt Clip Wi Receiver j r o n q p l 1. Audio OUT Jack 2. Power ON/OFF 3. Power/Status LED m 11 4. Volume UP 5. Volume Down 6. Link/VoIP 7. Next Track k 8. Previous Track s 9. Mute/ Play/Pause 10. (VoIP) Microphone u | } y { z w ~ x 12 v 11 11. USB Charging Port 12.
Wi AudioStream TRANSMITTER FEATURES Transmitter Controls and Connections j Audio IN Jack: k Power ON/OFF: l Power/Status LED: Provides a stereo connection for professional musical instruments and more... The Power/Status LED displays the status of six functions, ON/OFF, Battery Charging, Low Battery, Pairing, Mute, Operations and Sleep mode.
Wi AudioStream TRANSMITTER FEATURES o Mute: p Link/Pair: Press and hold the Mute button for 1.5 seconds to mute or unmute the audio. The Pairing function allows the transmitter to connect to up to 8 eight different receivers to create your own wireless audio matrix. Press and hold the Link button for 3 seconds until the Green LED display fast flashes.
Wi AudioStream TRANSMITTER FEATURES q Sleep: The Sleep function button on the transmitter is designed to prolong the battery life operation of the transmitter by 50% as well as the receiver battery life by 35% when not in use. When the Sleep function on the transmitter is activated, the transmitter sends a signal to the linked receiver to go into a standby mode while switching to full sleep mode.
Wi AudioStream TRANSMITTER FEATURES r Mode: The Mode multifunction button allows the user to choose between three different power up modes to support Stereo Miniature Condenser Microphones, Mono Miniature Condenser Microphones and Stereo Line-in to the transmitter. To select the desired operations mode, press and hold the Mode button for 2 seconds until the blue LED change its flashing sequence, then release.
Wi AudioStream RECEIVER FEATURES Receiver Controls and Connections u Audio OUT Jack: Provides a stereo connection for professional Sound Systems, Monitors, Mixers, Samplers, In-Ear Monitors, Headphones and more... v Power ON/OFF: w Power/Status LED: Press and hold the Power button for 2 seconds to turn the transmitter ON or OFF The Power/Status LED displays the status of six functions, ON/OFF, Battery Charging, Low Battery, Pairing, Mute and Sleep mode.
Wi AudioStream RECEIVER FEATURES z Link/VoIP: This multifunction button performs the Pairing and VoIP MIC activation. The VoIP function is covered in the VoIP Microphone section on page 17. The Pairing function allows the receiver to be discovered by the transmitter Press and hold the Link button for 3 seconds until the Green LED display fast flashes.
Wi AudioStream RECEIVER FEATURES | Previous Track: The Previous Track function button is used with the optional Jangus Music PC/MAC USB transmitter to remotely control jumping to the previous track for media players or sequencing software. Press the Previous Track button once to jump to the next audio track. } Mute/Pause/Play: Press and hold the Mute/Pause/Play button for 1.5 seconds to mute/un-mute audio.
Wi AudioStream RECEIVER FEATURES ~ VoIP Microphone: The microphone on the receiver is used with the optional Jangus Music PC/MAC USB transmitter for Voice over Internet Protocol (VoIP) communications. This powerful feature allow musicians to collaborate with each other over the internet. F Please refer to the “Function Matrix Table” section of this manual for more details To activate the VoIP Microphone on the receiver, press the LINK / VoIP button once.
Wi AudioStream GETTING STARTED Ready, Charge, Go! AC Charger USB Connector Before using your new Wi AudioStream digital wireless system, you need to fully charge the batteries for approximately 2 hours. Charging 1. 2. 3. 4. 5. 6. 7. 18 Plug the AC Charger into a power socket. Connect the USB Y-Split power cable to the USB port on the AC charger. Connect one of the two mini USB connectors into the transmitter USB port. Connect the second mini USB connector to the receiver USB port.
Wi AudioStream PARING Pairing the Wi AudioStream! Before using the Wi AudioStream with your instruments, you need to pair the transmitter with the receiver. Pairing will create a connection between the transmitter and the receiver. 1. First turn ON the transmitter (Tx) and the receiver (Rx) by pressing and holding the POWER button , on each of the units for 2 seconds. kv p 2. Press and hold the LINK button on the transmitter (Tx) for 3 seconds. The Power/Status LED on the transmitter will start flashing.
Wi AudioStream TRANSMITTER CONNECTION Audio Input Jack Connecting Miniature & Lavalier Microphones to Transmitter! The Wi AudioStream transmitter support Mono and Stereo miniature, subminiature and lavalier condenser microphones connection. 1. First locate your Ear/Head-worn Microphones or the Mono/Stereo miniature, lavalier microphones you wish to connect to the transmitter. 2. Connect the 1/8” stereo male end of the MIC cable into the “Audio Input” jack on the transmitter.
Wi AudioStream TRANSMITTER CONNECTION 5.1 For Stereo MIC Connection k a. Power up the transmitter by pressing and holding the POWER button for 2 seconds. b. Press and hold the Mode button for 2 seconds. The Blue LED will display slow flashes r F The slow flashing blue LED indicates stereo MIC connection mode and the flashing Green LED indicates the transmitter is searching for the receiver.
Wi AudioStream RECEIVER CONNECTION Connecting Analog and Digital Devices to Your Receiver! The Wi AudioStream receiver supports connections to analog and digital device such as Mixers, Amplifiers, Sound Systems, Speaker, Hard Disk Recorders, Samplers, Effects Pedals, Mixers, DJ gear, and more... Please note connections must be made with the power turned off. Please be aware that careless operation may damage your speaker system or cause malfunctions.
Wi AudioStream RECEIVER CONNECTION 3. Route the audio cable beneath the belt clip as shown to prevent accidental disconnection of cable. Audio Cable 4. Connect the 1/4” male end of the cable to the inputs of your amplifier, powered monitor, sound system, mixer or foot pedal. If you’re using the Wi AudioStream receiver in stereo, use both the L/ MONO and R jacks on your effects foot pedal, or use the L and R inputs for your sound system, sampler, mixer or hard disk recorder.
Wi AudioStream RECEIVER CONNECTION (Rx) 5. Turn ON the receiver by pressing and holding the POWER button on the receiver for 2 seconds. v F The Power Status LED on the receiver will show Solid Green LED. F The flashing Green LED on the transmitter will turn to Solid Green indicating v communication between the transmitter and receiver has been established. 6. Place the receiver on the amp as shown. Alternatively the receiver can be placed next to the foot pedal or stomp box. POWER 7.
Wi AudioStream RECEIVER CONNECTION Connecting Headphones and In-Ear Professional Personal Monitors! Audio Output Jack PLEASE PROTECT YOUR EARS! Prolonged use of headphones or In-Ear personal monitors at high volumes may affect your hearing capacity or may result in noise induced hearing loss (NHL). 1. Connect the 1/8” stereo connector end of your headphones or In-Ear personal monitor into the “Audio Output” jack on the receiver. In-ear Personal Monitors Audio Cable 2.
Wi AudioStream Tx FUNCTION MATRIX Transmitter (Tx) Button Function Matrix! Function Button Activation Hold Time k POWER Press and Hold Pairing Mode Press and Hold p LINK Signal Re-routing Click p LINK Volume UP/Down Click for Step, Press and hold for Auto mn Mute ON/OFF Press and Hold o Sleep / Wake up Press and Hold to Sleep / Click to Wake q Stereo Mic-in Mode Press and Hold r Power ON/OFF LED Status 2 sec Solid Green 3 sec Fast Green Flashes Click Click 1.
Wi AudioStream Tx LED INDICATOR CHART Transmitter (Tx) LED Indicator Chart! Function Searching For Receiver Linked to Receiver Sleep Mode Low Battery Charging With Power OFF Charging With Power ON Charging Complete LED Status l l l l l l l Flashing Green Solid Green Two Green Flashes Solid Green & Flashing Red Solid Red Solid Red & Green Red OFF r o n q p l m k 27
Wi AudioStream Rx FUNCTION MATRIX Receiver (Rx) Button Function Matrix! Function Power ON/OFF Pairing Mode v z z Button Activation Hold Time LED Status POWER Press and Hold 2 sec Solid Green LINK Press and Hold 3 sec Voice Over IP MIC LINK/VoIP Click (With Optional USB Tx Dongle) Click xy } Play/Pause } Next Track { Prev Track | Volume UP/Down Click for Step, Press and Hold for Auto Click Mute ON/OFF Press and Hold 1.
Wi AudioStream Rx LED INDICATOR CHART Receiver (Rx) LED Indicator Chart! Function Searching For Transmitter Linked to Transmitter Sleep Low Battery Charging With Power OFF Charging With Power ON Charging Complete LED Status w w w Flashing Green w w w w Solid Green & Flashing Red Solid Green Slow Green Flashes for 5 minutes then 2 Green Flashes (Activated by Tx) Solid Red Solid Red & Green | } y { z w x v Red OFF 29
Wi AudioStream PRODUCT SPECIFICATIONS Product Technical Specifications! Specifications Transmission Format: Frequency Response: Frequency Selection: S/N Ratio: Distortion: Connectors: Max Input Level: Max Output Level: Input Impedance: Output Impedance: Rechargeable Battery Life: Power Input: 30 2.
Wi AudioStream PRODUCT SPECIFICATIONS Specifications Battery Power Booster: 10~13 hours (With optional AA battery power booster adapter) USB Bus Power: Low Battery Alert: Power-up Modes: Antenna: Range: Units operating at the same time: Audio Signal Routing: MAC/PC/iPod Compatible: VoIP Capable: 802.
Wi AudioStream INSTRUMENTS SUPPORT Instruments Supported! Stereo Mini Ear-Worn In-Ear Microphones Microphones Monitors Brass & Wind Handheld Stringed Recorders Instruments Instruments Amplifiers Monitors Mixers DJ Gear Instruments • Miniature Condenser Microphones • Digital Multitrack Recorders • Subminiature Condenser Microphones • Mixers and Live Sound Systems • Ear-Worn and Head -Worn Microphones • Amplifiers and Powered Monitors • Lavaliere Microphones • DJ Gear and Samplers • Ambient La
Wi AudioStream Regulatory Compliance Information FCC NOTICES Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Wi AudioStream PRODUCT ACCESSORIES Audio Matrix Accessories for Extreme Flexibility! Accessory Specifications Wi StudioM: Digital wireless studio monitor headphones. Wi USB Tx: Digital wireless USB transmitter for MAC/PC audio and VoIP applications. Wi iPod Tx: Digital wireless transmitter for Apple iPod.
Wi AudioStream ACCESSORIES Cable & Power Accessories for Extreme Flexibility! Accessory Specifications Wi FreeBody Guitar Strap: Guitar strap with integrated wireless transmitter and AA battery power booster that provide the experience of true wireless freedom without impeding your body movement. When you remove your guitar, the wireless system goes with it to the guitar stand.
Wi AudioStream PRODUCT WARRANTY Product Warranty Terms! Jangus Music, Inc warrants that its products are free from material defects and faulty workmanship for a period of twelve (12) months from the date of purchase. Jangus Music will repair or replace, at its option, any Product that breaches this warranty during said period.
Wi AudioStream PRODUCT WARRANTY Out of Warranty! Should your Wi AudioStream not function properly after the warranty period has expired, please contact Jangus Music’s Customer Care at www.jangusmusic.com. Limitations of Liability! Jangus Music expressly assumes no responsibility for any error, omission, interruption, deletion, defect, delay in operation or transmission, communications failure, theft or destruction or unauthorized access to, or alteration of, any use of the Wi AudioStream product.
w w w.jangusmusic.com © 2009 Jangus Music, Inc. All rights reserved. Wi, Wi AudioStream, Wi FreeBody, Digital Wireless Stereo logo and Jangus Music logo are registered trademarks of Jangus Music, Inc. in the United States and may be registered trademark or trademarks in other countries. All other trademarks included herein are the property of their perspective owners. US and Foreign Patents Pending. (Design and specifications are subject to change without notice).
