User Guide Instruction Manual

3. Route the audio cable beneath the belt clip as shown to prevent
accidental disconnection of cable.
4. Connect the 1/4” male end of the cable to the inputs of your
amplier, powered monitor, sound system, mixer or foot pedal.
If you’re using the Wi AudioStream receiver in stereo,
use both the L/ MONO and R jacks on your
effects foot pedal, or use the L and R inputs
for your sound system, sampler, mixer or
hard disk recorder.
RECEIVER CONNECTION
Wi AudioStream
23
POWER
LINK/VoIP
Audio Input
Belt Clip
Audio Cable