User guide

Playing Music
The iMuffs Dock Adaptor for iPod enables the iPod to
transmit a stereo audio signal wirelessly to your iMuffs
Stereo Bluetooth Headphones, with a range of 30 feet
(10 meters).
1. Turn your iMuffs headphones on with the power
switch.
2. Plug the Bluetooth adapter into the dock connector
port located on the bottom of your compatible iPod.
3. If your iPod is paused or asleep, press the menu or
center button on the iPod to resume operation.
4. Your iMuffs headphones and adaptor will automatically
connect. The blue LEDs on the headphones and
adaptor will flash while they seek a connection. When
the connection is successful, the LEDs will stay on for
3 seconds, and music will begin playing.
5. To pause music, you may press the Play/Pause button
on the headphones or the iPod itself. Pressing either
button again re-starts the music where it left off.
6. To access the next track, press the Next button. To
access the previous track, press the Previous button.
7. To fast-forward, press and hold the Next button. To
rewind, press and hold the Previous button.
7
6
8. To increase the volume, rock the volume control up. To
decrease the volume, rock the volume control down.
The blue LED on the headphones will flash once
whenever a button is pressed, to indicate that a
Bluetooth signal has been transmitted. Accordingly, the
LED on the adaptor will flash whenever a Bluetooth
signal is received.
*
For MB210 users only. MB200 users should plug the adapter into the top
connector port of your compatible iPod.
*