User manual

Unit 2: Technical Data
SATO MB2i Service Manual PN 9001145B Page 2-3
PRINT
Method Direct Thermal
Speed (maximum) 4.05 Inches Per Second (103 mm/s) (varies with print duty)
Print Module (dot size) .0049 Inches (.125 mm)
Resolution 203 Dots Per Inch (8 dpmm)
Maximum Print Width 1.89 Inches (48 mm)
Maximum Print Pitch 6.30 Inches (160 mm)
Angle 0°, 90°, 180°, 270°
INTERFACE MODULES
Serial Port
RS232C (9600 to 57,6000 dps) Standard
Ready/Busy or X-On/X-Off Flow Control
Bi-Directional Status
IrDA Ir. Std., BHT, Ir Comm (3-wire cooked), Ir Obex (optional)
Ethernet 802.11B Wireless Wi-Fi (with built-in display)
Bluetooth Version 1.1 Compliant
MEDIA
Media Types
Super High Sensitive, Techno-Thermal A, Sythetic Paper Thermal
C, Non-Sticky Thermal 64, Two-Color Thermal
Linerless Media Standard (strong/weak adhesive)
Media Thickness 0.0025 to 0.0075 Inches (0.064 - 0.190 mm)
Roll Media Outside Diameter 2.64 Inches (67 mm +/- 0.5) MB200i only
Wound Face In / Face Out. Face In is for linerless only.
Core Size 0.75 to 1.0 Inches ( 19.05-25.40 mm) internal diameter
CHARACTER FONT CAPABILITIES
MATRIX FONTS
XU Font 5 dots W x 9 dots H (Helvetica)
XS Font 17 dots W x 17 dots H (Univers Condensed Bold)
XM Font 24 dots W x 24 dots H (Univers Condensed Bold)
OA Font (OCR-A)
OB Font (OCR-B)
AUTO SMOOTHING FONTS
WB 18 dots W x 30 dots H
WL 28 dots W x 52 dots H
XB 48 dots W x 48 dots H (Univers Condensed Bold)
XL 48 dots W x 48 dots H (Sans Serif)