User manual

Unit 3: Interface Secifications
SATO MB2i Service Manual PN 9001145B Page 3-12
COMPUTER SETUP
Perform the following procedure to configure the host computer for AD-HOC interface
connectivity.
1. At the host computer, access Control Panel and then Network Connections.
2. When the Network Connections screen (Figure 3-6) appears, ensure the icon to the left of
“Wireless Network Connection” does not have a red X over it. Proceed to step 3 if so, exit if
not.
Figure 3-6, Network Connections
3. Click on the icon mentioned in step 2 to proceed to the Wireless Network Connection
Properties screen (Figure 3-7a/b).
4. Click on the Wireless Networks tab to view that menu, then on the Advanced button.
Figure 3-7a/b, Wireless Network Connection Properties