User manual

Unit 3: Interface Specifications
SATO MB2i Service Manual PN 9001145B Page 3-15
14. Alter the following fields as necessary:
• IP Address: Change to 150.100.100.11 .
• Subnet Mask: 255.255.255.0 (should always be the same)
15. Click on the OK button to exit the Internet Protocol (TCP/IP) screen.
16. When the Wireless Network Connection Properties screen (Figure 3-9) reappears, click on
the OK button to exit.
17. To test the ad-hoc wireless connection, perform the following procedure:
1. Access Control Panel/MB200i Print Driver/Printer and Faxes, then click on
MB200i Printer Driver.
2. When SATO MB200i Properties screen (Figure 3-12a) appears, select Ports tab.
3. When the Ports menu (Figure 3-12b) appears, click on the Add Port button.
Figure 3-12a/b, Ports
4. When the Printer Ports screen (Figure 3-13) appears, select the Standard TCP/IP
Port option followed by the New Port button.
Figure 3-13, Printer Ports