User manual

Unit 4: LCD Display

SATO MB2i Service Manual PN 9001145B Page 4-2

DISPLAY FIELDS

The LCD Display is an intergrated purchase option only and applicable only for the Wireless LAN

and interface. Due to its limited application, this is the only unit within this manual that covers the

LCD display. All of its features, functions, and menus are identified and defined here.

Figure 4-1, LCD Display

The LCD has three field areas of display; two graphical and one for text. They are as follows:

1. Graphical Battery charge status.

2. Graphical Electrical field strength for the Wireless LAN.

3. Text Two text lines showing the printer’s status.

BATTERY LEVEL (1)

The battery charge of the printer’s power pack is displayed in four graduations as identified in the

table below. The battery charge will always be displayed in field 1 as shown in Figure 4-1 above.

ICON DESCRIPTION

Displays a full charge of 8.0 volts or more.

Displays the detected voltage is between 7.8 and 7.9.

Displays the detected voltage is between 7.6 and 7.7. The printer

will go into the Sleep Mode and the LED will blink every 4 seconds.

Displays the detected voltage level is less than 7.5. The printer will

automatically power off 30 seconds after displaying this icon.