User manual

Unit 5: Printer Configuration
SATO MB2i Service Manual PN 9001145B Page 5-6
DISPENSE MODE
This feature allows for the determination of the method of dispense.
AUTO Prints a single label after receiving data, waits for
the label to be retrieved, then automatically prints
the next label.
MANUAL Prints a single label after receiving data and then
goes offline. Prints a single label each time the
PRINT key is pressed until the specified number of
labels has been printed. A new job will have to be
dowloaded to print more.
Refer to Figure 1-1 of the Introduction unit in this manual for dipswitch location.
Figure 5-3, Dispense Mode
Choose Applicable Option
Auto Dispense: (DSW = 1: OFF, 2: OFF, 3: OFF, 4: ON) + PRINT + POWER
Manual Dispense: (DSW = 1: OFF, 2: OFF, 3: OFF, 4: ON) + FEED + POWER
Blinks green while setting.
Press POWER and
return dip switches to
their previous positions.
Flashes green when complete.
Printer shuts down and exits
Dispense Mode.