User manual

Unit 8: Adjustment Procedures
SATO MB2i Service Manual PN 9001145B Page 8-4
DEFAULT SETTING MODE
The Default Settings Mode allows the printer to be returned to factory defaults. This process
does not however, affect the printer’s internal counters. Host to printer interface connection is
required.
The figure below provides the specific sequence of events required by the operator and the
printer.
Refer to Figure 1-1 of the Introduction unit in this manual for dipswitch location.
Figure 8-3, Default Setting Mode
(DSW = 1: OFF, 2: OFF, 3: OFF, 4: OFF) + Cover Open +
PRINT + POWER
Flashes
orange and enters the
Default Setting Mode.
Confirm light is
green and press
POWER.
Blinks green while Default
Setting in progress.
Printer shuts down.
Flashes green when Default
Setting is complete.