User Manual

Pre-configuring the Stations
Version 1.1 - 01/04/00 15
5. Select
Remote Station Configuration
.
The Remote Station Configuration menu appears:
6. In the Radio Id field, type the Radio Station ID for the station (you must identify a
unique Radio Id for all remotes and the base station).
Note:
The order in which you enter the IDs determines the polling sequence of the
units.
7. In the Distance field, type the distance, in meters, from the Radio ID to the base
station.
Following is an example of a completed polling list entry:
8. Once you have entered the ID and distance for each remote station and the base
station, press the
Esc
key until you exit the Configuration menu.
9. Power down the computer.
You have pre-configured the polling list.
The Remote Station
Configuration menu
is two pages. The
polling list can
contain up to 100
stations.
Remote Station Configuration - Page 1
Remote Radio Id Distance Remote Radio Id Distance Remote Radio Id Distance
Number 0..1023 0..9999 Number 0..1023 0..9999 Number 0..1023 0..9999
1 ->1 1900 2 2 1900 3 0 0
4 0 0 5 0 0 6 0 0
7 0 0 8 0 0 9 0 0
10 0 0 11 0 0 12 0 0
13 0 0 14 0 0 15 0 0
16 0 0 17 0 0 18 0 0
19 0 0 20 0 0 21 0 0
22 0 0 23 0 0 24 0 0
25 0 0 26 0 0 27 0 0
28 0 0 29 0 0 30 0 0
31 0 0 32 0 0 33 0 0
34 0 0 35 0 0 36 0 0
37 0 0 38 0 0 39 0 0
40 0 0 41 0 0 42 0 0
43 0 0 44 0 0 45 0 0
46 0 0 47 0 0 48 0 0
49 0 0 50 0 0 51 0 0
52 0 0 53 0 0 54 0 0
55 0 0 56 0 0 57 0 0
Remote Radio Id Distance
Number 0..1023 0..9999
1 ->1 1900
The station is the first item in the polling list.
The RF Station ID is 1.
The RF Station ID 1 is 1900 meters from the base station.