User Manual

Configuring Using the Menus
46 Version 1.1 - 01/04/00
Working with System Images
When you first power up the 300-24 unit, it starts with the factory-image. As new images
are developed, Wi-LAN will place them on their web site where you can download the
image files to the 300-24. Currently, only the factory-image is available. See Upgrading
Software via FTP on page 79 for more information about downloading new image files.
Setting the Default Image
As discussed above, as new images are developed and released, you will have the option
to select from a list of images to use on the 300-24. Once you have more than one image
saved on the unit, you can define which image file you want to use as the default each time
you power up the 300-24.
To set the default image
1. From the Main System menu, select
System Commands
.
The System Commands window appears:
2. Select
Set Default System Image
.
An arrow appears to the left of the entry field.
3. In the Set Default System Image entry field, scroll to select the image to use as the
default.
4. Press the
Enter
key.
The new image file appears in the field and will be used each time the 300-24 is
powered up.
System Commands
Set Default System Image -> FACTORY-IMAGE
Reboot Current Image Press Enter to Execute
Reboot a System Image FACTORY-IMAGE
Restore Factory Configuration Press Enter to Execute
Restore Poweron Configuration Press Enter to Execute
Enter Loopback Mode Press Enter to Execute
Return to Normal Mode Press Enter to Execute
Reset Radio Statistics Press Enter to Execute
Reset MAC Layer Statistics Press Enter to Execute
U
se
th
e arrow
k
eys
on the keyboard to
scroll through the
field selections.