User Manual

Configuring Using the Menus
52 Version 1.1 - 01/04/00
Configuring the Internet IP Settings
To enable the 300-24 unit to communicate with other units, you need to define the Internet
IP settings. You can also configure IP masks that you can use to create subnets for your
system. These subnets enable you to perform basic multicasting tasks.
Setting the Internet IP Address
You need to indicate the IP address for each 300-24 unit. This address enables
communication via TCP/IP.
To set the Internet IP address
1. From the Main System menu, select
Network Configuration
.
The Network Configuration window appears:
2. Select
Internet IP Address
.
An arrow appears to the left of the entry field.
3. Press the
Enter
key.
The entry field changes to edit mode.
4. Type the unique Internet IP address for the unit.
5. Press the
Enter
key.
The Internet IP address appears in the field and is assigned to the unit.
To set the Internet IP mask
1. From the Main System menu, select
Network Configuration
.
The Network Configuration window appears:
2. Select
Internet IP Mask
.
An arrow appears to the left of the entry field.
When you change
the IP or MAC
addresses, you must
reboot the current
image for the
changes to take
effect. See
Rebooting Images
on page 47 for more
information.
Network Configuration
Internet IP Address -> 192.168.3.85
Internet IP Mask 255.255.255.0
Ethernet MAC Address 000203040506
IP Routing Option Transparent
Default Gateway IP Address 192.168.3.52
SNMP NMS Trap IP Address 192.168.3.52
Network Configuration
Internet IP Address 192.168.3.85
Internet IP Mask -> 255.255.255.0
Ethernet MAC Address 000203040506
IP Routing Option Transparent
Default Gateway IP Address 192.168.3.52
SNMP NMS Trap IP Address 192.168.3.52