User Manual

Configuring the Radio
Version 1.1 - 01/04/00 59
To set the RF center frequency
1. From the Main System menu, select
Radio Configuration
.
2. Press the
Enter
key.
The Radio Configuration menu appears:
3. Select
RF Center Frequency
.
4. Press the
Enter
key.
The entry field is highlighted.
5. Scroll to select the RF center frequency you will apply to all units in the network.
6. Press the
Enter
key.
The center frequency is applied to the unit.
Configuring the IP Filter for a Remote Station
You can create IP filters to filter the data that is transmitted and received through the
300-24 unit. The remote unit can filter packets received from the wire or air, or both.
When you define a filter, you indicate the host and mask IP addresses of the packets that
will be received and transmitted to the unit.
To configure the IP filter for a remote station
1. From the Main System menu, select
IP Filter Configuration
.
2. Press the
Enter
key.
The IP Filter Configuration window appears:
3. Select the
Undefined
field in the Filter row you are defining.
An arrow appears to the left of the field.
To ensure
communication
between units, all
units in the network
must have the same
center frequency.
Radio Configuration
OFDM Station Type Remote Unit
RF Station Id [0..1023] 2
RF Network Id [0..1023] 0
RF Center Frequency -> 2.440 GHz
You can configure IP
filters for only
remote stations.
IP Filter Configuration - Page 1
Filter Type Host/Net Address Host/Net Mask
1 ->Undefined 0.0.0.0 0.0.0.0
2 Undefined 0.0.0.0 0.0.0.0
3 Undefined 0.0.0.0 0.0.0.0
4 Undefined 0.0.0.0 0.0.0.0
5 Undefined 0.0.0.0 0.0.0.0
6 Undefined 0.0.0.0 0.0.0.0
7 Undefined 0.0.0.0 0.0.0.0
8 Undefined 0.0.0.0 0.0.0.0
9 Undefined 0.0.0.0 0.0.0.0
10 Undefined 0.0.0.0 0.0.0.0