User Manual

Configuring the Radio
Version 1.1 - 01/04/00 61
Configuring the Polling List
You can configure the polling list for the base station. When you configure the list, you
must include the base station and all remote stations in the list.
To configure the polling list
1. From the Main System menu, select
Remote Station Configuration
.
The Remote Station Configuration menu appears:
2. In the Radio Id field, type the Radio Station ID for the station (you must identify a
unique Radio Id for all remotes and the base station).
Note:
The order in which you enter the IDs determines the polling sequence of the
units.
3. In the Distance field, type the distance, in meters, from the Radio ID to the base
station.
Following is an example of a completed polling list entry:
Remote Station
Configuration only
appears in the Main
System menu for
units configured as
the base station.
Remote Station Configuration - Page 1
Remote Radio Id Distance Remote Radio Id Distance Remote Radio Id Distance
Number 0..1023 0..9999 Number 0..1023 0..9999 Number 0..1023 0..9999
1 ->1 1900 2 2 1900 3 0 0
4 0 0 5 0 0 6 0 0
7 0 0 8 0 0 9 0 0
10 0 0 11 0 0 12 0 0
13 0 0 14 0 0 15 0 0
16 0 0 17 0 0 18 0 0
19 0 0 20 0 0 21 0 0
22 0 0 23 0 0 24 0 0
25 0 0 26 0 0 27 0 0
28 0 0 29 0 0 30 0 0
31 0 0 32 0 0 33 0 0
34 0 0 35 0 0 36 0 0
37 0 0 38 0 0 39 0 0
40 0 0 41 0 0 42 0 0
43 0 0 44 0 0 45 0 0
46 0 0 47 0 0 48 0 0
49 0 0 50 0 0 51 0 0
52 0 0 53 0 0 54 0 0
55 0 0 56 0 0 57 0 0
Remote Radio Id Distance
Number 0..1023 0..9999
1 ->1 1900
The station is the first item in the polling list.
The RF Station ID is 1.
The RF Station ID 1 is 1900 meters from the base station.