User Manual
Table Of Contents
- Notices
- Welcome
- Get Started
- Completing Pre-Installation
- Determining the RF Link
- Installing Base and Remote Stations
- Configuring Using the Menus
- Using SNMP
- Appendix A: Product Specification
- Appendix B: Monitor and Test Links
- Appendix C: Upgrading Software
- Glossary
- Index
Version 1.1 - 01/04/00 73
Appendix A: Product Specification
Overview
Following is the specification for the I.WiLL™ 300-24 Access Point (300-24). The
specification may change without notice. Contact Wi-LAN technical support to ensure
that you are working with the most recent specification. See Customer Support on page 3
for information about contacting Wi-LAN.
Specification
General Specifications
Modulation Method: Combined Direct Sequence Spread Spectrum
& Wide-band Orthogonal Frequency Division
Multiplexing (W-OFDM)
Wireless Data Rate: 30.0 Mbps
Wire Data Rate: 21 Mbps
RF Frequency Range: 2.4000 - 2.4835 GHz (unlicensed ISM band)
Number of Channels: 3 (center frequency can be set to any
frequency in RF range in 1 MHz increments)
Power Requirements: 110W @ 115VAC/230VAC 50/60 Hz
Physical Dimensions: 43.2 x 37.47 x 9.25 centimeters
(14 x 14.75 x 3.75 inches)
Approvals: Industry Canada, FCC, CE, CEPT
Product not available for sale until certification
has been obtained.