User's Manual

Wi2Wi, Inc. Rev.1.1
Data Sheet, WLAN-Bluetooth Module– W2CBW009S
Dated: October 20, 2009
The content of this document is to be treated as strictly confidential and is not to be disclosed,
Reproduced or used, except as authorized in writing by Wi2Wi, Inc.
Copyright © 2009 Wi2Wi, Inc.
Page 9 of 20
Carrier Suppression Max. TX Power - -25 - dBc
Adjacent Channel
Rejection
Desired channel is
3dB above
sensitivity, PER<8%
- 48 - dBc
802.11g Current Consumption
Initialization Current
- 100 - mA
Continuous Transmit
@54Mbps 220 230 240 mA
Continuous Receive
@54Mbps 200 210 220 mA
IEEE 802.11 Power Save
Mode
- 10 - mA
Deep Sleep - 2 - mA
802.11g RF System Specifications
Transmit Power Output
- 15 - dBm
6 Mbps, 10% PER - -90 - dBm
9 Mbps, 10% PER - -88 - dBm
12 Mbps, 10% PER - -88 - dBm
18 Mbps, 10% PER - -87 - dBm
24 Mbps, 10% PER - -83 - dBm
36 Mbps, 10% PER - -80 - dBm
48 Mbps, 10% PER - -75 - dBm
Receive Sensitivity
54 Mbps, 10% PER - -74 - dBm
Maximum Receive Level PER<10% -
IEEE
Compliant
- dBm
Transmit Frequency
Offset
Low, Middle, High
Channels
- ±10 - PPM
- -30@fc±11MHz -
- -40@fc±20MHz - Spectral Mask Max. TX Power
- -50@fc±30MHz -
dBc
Error Vector Magnitude
Max. TX Power @
54Mbps
- -29 - dB
Carrier Suppression Max. TX Power - -25 - dBc
Desired channel is
3dB
above sensitivity,
54Mbps,
Adjacent Channel
Rejection
PER<1 0%
- 15 - dBc
Bluetooth Current Consumption (USB BUS)
Initialization Current - 15 - mA
Continuous Transmit
40 45 50 mA
Continuous Receive
28 32 38 mA
Deep Sleep - 2 - mA
Bluetooth RF System Specifications
Transmit Power Output 1.5 3 4 dBm