Vanity Version:02/15/2023 1/24
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 73 6 x 35 mm E x 10 6 x 10 mm Ix5 C x 24 B x 73 5 x 45 mm 12 x 9.5 mm Gx8 Fx5 4 x 18 mm 3.
26 18 20 18 17 11 4 1 1 19 18 5 22 23 21 11 27 1 1 6 13 x2 91 14 10 4 7 91 8 11 13 15 12 16 3 1 1 1 2 ALWAYS install tipover restraint provided. NEVER put a TV on this product. NEVER allow children to stand,climb or hang on drawers,doors,or shelves. NEVER open more than one drawer at a time. Place heaviest items in the lowest drawers. This is a permanent label.
Cx4 1 Dx4 5 x 45 mm 9 x 9 mm Place part(D) into corresponding holes in plate 15 and plate 16 at first. D Attention: When placing C, make sure that the round hole is aligned with the direction of D. Please pay attention to its orientation as picture shown. D D D D 15 16 Connect plate 10 and 11 with plate 15 and 16, fix using screw(C) as shown.
Kx6 Ax4 2 6 x 35 mm AA Insert quickfit screw(A) into corresponding holes in plate 11 and 12 with a screwdriver as shown. • A A 10 11 12 11 A A 11 K K K K K K K Knock foot peg(K) into the the bottom of plate 10, 11 and 12 as shown. Dx8 3 9 x 9 mm Place part(D) into corresponding holes in plate 13 as shown.
4 Cx8 Bx4 12 x 9.5 mm 5 x 45 mm 11 14 B B Attention: When placing C, make sure that the round hole is aligned with the direction of D. 180° C C Connect plate 11 and 12 with plate 14 at first, insert cam lock(B) into plate 14 and turn clockwise to tighten as shown. 13 11 C C 14 11 C C BB B B 13 13 11 11 Then fix plate 13 using screw(C) as shown.
5 Slide back plate along the grooves as shown.
Ax6 6 Bx6 6 x 35 mm E x 10 12 x 9.5 mm 6 x 10 mm Insert quickfit screw(A) into corresponding holes in plate 27 with a screwdriver as shown. A 27 A A A A A 27 A Cover plate 27 to the top, insert cam lock(B) into plate 10,11,12 and turn clockwise to tighten as shown. 27 B E E B B B E E B B E 27 E 10 E E E E 11 12 B E 10 180° 10 E Insert part(E) into corresponding holes in plate 10,11 and 12 as shown.
A x 40 7 6 x 35 mm A A Insert quickfit screw(A) into plate 2,3,5,7,8,6 and 4 with a screwdriver as shown.
Bx 8 8 11 Fx1 12 x 9.5 mm B B Ix1 4 x 18 mm 3 3 Attach plate 1 to plate 3, turn cam lock(B) in plate 1 clockwise to tighten as shown. 180° Slide BIG drawer bottom plate along the grooves. B B 31 11 11 B B 11 B B 3 11 1 2 2 2 2 1 1 B 2 2 180° B B Attach drawer face plate 2, and turn cam lock(B) clockwise to tighten as shown. B 2 2 Fix knob(I) to plate 2 with screw(F) as shown.
Bx 8 9 Fx1 12 x 9.5 mm B 11 B 3 4 180° Ix1 4 x 18 mm Attach plate 1 to plate 4, turn cam lock(B) in plate 1 clockwise to tighten as shown. Slide SMALL drawer bottom plate along the grooves. B B 41 11 11 B B 11 B B 4 11 1 5 1 5 2 I B B 1 B 2 5 180° Attach drawer face plate 5, and turn cam lock(B) clockwise to tighten as shown. 5 2 B Fix knob(I) to plate 5 with screw(F) as shown.
B x 16 10 Fx2 12 x 9.5 mm B 11 B Ix2 4 x 18 mm 3 4 180° Attach plate 1 to plate 4, turn cam lock(B) in plate 1 clockwise to tighten as shown. Slide SMALL drawer bottom plate along the grooves. B B 41 11 11 B B 11 B B 4 11 1 6 1 1 B 2 6 180° 6 2 B B Attach drawer face plate 6, and turn cam lock(B) clockwise to tighten as shown. B 6 2 Fix knob(I) to plate 6 with screw(F) as shown.
Bx 8 11 Fx1 12 x 9.5 mm B 91 B Ix1 4 x 18 mm 3 7 180° Attach plate 9 to plate 7, turn cam lock(B) in plate 1 clockwise to tighten as shown. Slide SMALL drawer bottom plate along the grooves. B B 71 91 19 B B 91 B B 7 91 9 8 9 B 9 B 2 8 180° 8 2 B I Attach drawer face plate 8, and turn cam lock(B) clockwise to tighten as shown. B 8 2 Fix knob(I) to plate 8 with screw(F) as shown.
12 Place drawers in corresponding positions as shown.
Insert 13 A x 13 Dx1 6 x 35 mm 9 x 9 mm A A Insert quickfit screw(A) into plate 19 and 23 with a screwdriver as shown. A A A A A A 19 A A A A A A 23 D Place part(D) into plate 21 as shown.
B x 10 14 Cx1 12 x 9.5 mm 5 x 45 mm B B B 20 19 B B 21 21 B 22 B B B B Attention: When placing C, make sure that the round hole is aligned with the direction of D. 23 Connect plate 19 and 23 with plate 20,21 and 22 at first, and turn cam lock(B) clockwise to tighten as shown. 20 21 19 22 23 C 19 B 21 180° C 22 21 Fix plate 21 with plate 22 using screw(C) as shown.
Ax3 15 Dx3 6 x 35 mm 9 x 9 mm A A A A 17 D Insert quickfit screw(A) into plate 17 with a screwdriver as shown. x3 18 Place part(D) into plate 18 as shown.
Bx6 16 Cx3 12 x 9.5 mm 5 x 45 mm 18 B B 18 B B 17 19 18 B Attention: When placing C, make sure that the round hole is aligned with the direction of D. Connect plate 17 and 19 with plate 18 at first, and turn cam lock(B) clockwise to tighten as shown. B 18 17 B 180° C 26 18 18 19 17 C 26 18 B 18 19 Fix plate 26 with plate 18 using screw(C) as shown.
Bx7 Ax7 17 12 x 9.5 mm 6 x 35 mm Insert quickfit screw(A) into plate 27 at first. AA A AA AA A 27 A 27 B BB BBB Connect the two components, and turn cam lock(B) clockwise to tighten as shown.
18 Jx3 6 x 20 mm Fix the mirror with plate 20 using screw(J) as shown.
Cx8 19 Dx8 5 x 45 mm 9 x 9 mm Place part(D) into plate 24 at first. Attention: When placing C, make sure that the round hole is aligned with the direction of D. D 24 D D D D C C x2 24 24 C C 24 24 25 25 C C C 24 25 25 24 Connect plate 25 with plate 24 using screw(C) as shown.
Hx2 Gx4 20 3.5 x 12 mm Kx4 25 x 20 mm Fix iron part(H) to the inside of two plate 25 with screw(G) as shown. H G G G G H h h G H K K K G K Knock foot peg(K) into the bottom of plate 25.
21 Gx4 3.5 x 12 mm GG GG H G G Attach seat plate and fix with iron sheet using screw(G) as shown.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
