Vanity Version:02/15/2023 1/24
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 83 6 x 35 mm Ex8 6 x 10 mm Ix2 C x 16 B x 83 12 x 9.5 mm 5 x 45 mm G x 28 Fx5 4 x 18 mm D x 16 9 x 9 mm Hx2 3.
21 22 19 17 15 25 24 20 18 23 16 22 14 2 13 11 3 2 1 X3 12 7 6 9 11 11 10 2 5 8 2 4 X1 27 26 ALWAYS install tipover restraint provided. NEVER put a TV on this product. NEVER allow children to stand,climb or hang on drawers,doors,or shelves. NEVER open more than one drawer at a time. Place heaviest items in the lowest drawers. This is a permanent label.
1 Dx4 9 x 9 mm Place part(D) into corresponding holes in plate 8 and plate 9 at first. Please pay attention to its orientation as picture shown. D 8 D 2 D D 9 D Cx4 5 x 45 mm Connect plate 6 and 7 with plate 8 and 9, fix using screw(C) as shown. C Attention: When placing C, make sure that the round hole is aligned with the direction of D.
Kx6 A x 16 3 6 x 35 mm Insert quickfit screw(A) into corresponding holes in plate 7 and 10 as shown. A A A A A A 7 A A K 4 A A A K A 10 A K K A A A AA Knock foot peg(K) into the the bottom of plate 6,7 and 10 as shown. K K K B x 16 12 x 9.5 mm Connect plate 7 and 10 with plate 11(x3) and plate 12 at first, insert cam lock(B) into plate 11,12 and turn clockwise to tighten as shown.
Ex8 5 6 x 10 mm Slide back plate along the grooves as shown. Screw part(E) into corresponding holes in plate 6,7 and 10 as shown. E 6 E E E E E 7 10 9 Dx2 Ax6 6 E E E 6 x 35 mm 9 x 9 mm D A A A A D 13 A A D 14 Insert quickfit screw(A) into corresponding holes in plate 13 and 14 with a screwdriver as shown. Place part(D) into corresponding holes in plate 13 as shown.
7 Bx6 Cx2 12 x 9.5 mm 5 x 45 mm Attention: When placing C, make sure that the round hole is aligned with the direction of D. B 180° 14 13 B B B B B C C B 7 7 C Cover plate 13 to the left top, plate 14 to right top of the component, insert cam lock(B) into plate 6,7,10 and turn clockwise to tighten as shown. Fix plate 7 with plate 13 using screw(C) as shown.
8 A x 24 Lx3 Fx3 6 x 35 mm 4 x 18 mm Insert quickfit screw(A) into corresponding holes in plate 1 and 3 with a screwdriver as shown. Fix knob(L) to plate 1 with screw(F) as shown. A A L 1 A A A 3 F 9 L A A A A F x3 B x 12 12 x 9.5 mm Attach plate 2 to plate 3, turn cam lock(B) in plate 2 clockwise to tighten as shown.
Slide SMALL drawer bottom plate along the grooves as shown. 2 3 x3 2 11 B x 12 12 x 9.5 mm Attach drawer face plate 1, and turn cam lock(B) clockwise to tighten as shown.
Ax8 12 Lx1 Fx1 6 x 35 mm 4 x 18 mm Insert quickfit screw(A) into corresponding holes in plate 4 and 5 with a screwdriver as shown. Fix handle(L) to plate 4 with screw(F) as shown. A A L 4 L A A 5 F F 4 13 A A A A Bx4 12 x 9.5 mm Attach plate 2 to plate 5, turn cam lock(B) in plate 2 clockwise to tighten as shown.
14 Slide BIG drawer bottom plate along the grooves as shown. 2 5 2 15 Bx4 12 x 9.5 mm Attach drawer face plate 4, and turn cam lock(B) clockwise to tighten as shown.
16 Place drawers in. 4 1 1 1 17 Ax2 6 x 35 mm Dx2 9 x 9 mm A A 17 D 15 A 16 D D Insert quickfit screw(A) into plate 15 at first. Place part(D) into plate 16 and plate 17 asn shown.
18 Bx2 Cx2 12 x 9.5 mm 5 x 45 mm C 15 B 18 17 15 Attach plate 16 and 17 to plate 15, turn cam lock(B) clockwise to tighten as shown. Fix plate 18 with plate 16 and 17 using screw(C) as shown. 19 Ax2 6 x 35 mm Attention: When placing C, make sure that the round hole is aligned with the direction of D. B C 18 B 16 C 17 18 Bx2 12 x 9.5 mm Insert quickfit screw(A) into plate 21 and 23 at first. Attach plate 21 and 23 to plate 22 respectively, turn cam lock(B) clockwise to tighten as shown.
20 A x 18 6 x 35 mm A A A A A A A 19 A A A A A A A A 21 A A A A A Insert quickfit screw(A) into corresponding holes in plate 19 and 20 with a screwdriver as shown. 20 A B x 16 12 x 9.5 mm Connect plate 19 and 20 with plate 21,22,23 and 24 at first, and turn cam lock(B) clockwise to tighten as shown.
22 Bx2 12 x 9.5 mm 21 21 22 22 19 19 17 17 plate 16 and 17 at first, and turn cam lock(B) clockwise to tighten as shown. 24 24 B 18 18 15 20 Connect plate 19 with 20 16 16 23 23 22 22 B B 23 Ax7 6 x 35 mm Insert quickfit screw(A) into plate 13 and 14 at first.
24 Bx7 12 x 9.5 mm Connect the two components, and turn cam lock(B) clockwise to tighten as shown.
25 18/24
Gx4 26 Ix2 3.5 x 12 mm Separate glide into two parts at first. Fix slide rail(I) to plate 22 using screw(G) as shown.
27 Gx4 Ix2 3.5 x 12 mm I G Fix runner(I) to the back of the mirror using screw(G) as shown. I I G G G G I G G 28 Align rails, slide the mirror as shown.
Fx1 29 Gx4 4 x 18 mm Lx1 Jx2 3.5 x 12 mm Fix hinge(J) to plate 25 using screw(G) as shown. Fix knob(L) using screw(F). J 25 G G 25 J F L L F J 30 G G Gx8 3.5 x 12 mm Attach door plate 25 to plate 15 by fixing hinge using screw(G) as shown.
31 If there is misalignment after you install, adjust the screw to the best condition 22/24
Dx8 32 9 x 9 mm Place part(D) into plate 27 at first. D D 27 D D 27 D D D D D 33 Cx8 5 x 45 mm Connect plate 26 with plate 27 using screw(C) as shown. C C C Attention: When placing C, make sure that the round hole is aligned with the direction of D.
Gx4 34 Hx2 Kx4 3.5 x 12 mm Fix iron part(H) to the inside of two plate 26 with screw(G) as shown. Knock foot peg(K) into the bottom of plate 26. H GG 27 26 H 26 G G K K K K K Gx4 35 3.5 x 12 mm Attach seat plate and fix with iron sheet using screw(G) as shown.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.