Display Cabinet Version:11/03/2022 1/37
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 78 DRx 2 B x 78 E x 71 CLx 2 F x2 CRx 2 DLx 2 Gx 8 H x 18 4x16 mm J x 108 K x 16 4 x 14mm 3 x 12mm P x2 Q x 12 L x 23 Mx 2 4 x 30 mm 4 x 12mm R x 12 S x18 3 x 16mm 3/37 N x12 T x2
1 30 31 3 35 5 31 30 15 4 14 14 20 14 32 20 13 19 32 2 19 13 14 6 8 33 34 9 16 10 35 33 16 17 34 26 24 11 25 27 29 21 28 21 4/37 25 27 7 12 12 26 24 18 22 23
1 x1 2 x1 3 x1 4 x1 5 x1 6 x1 7 x1 8 x1 9 x1 10 x 1 11 x 1 12 x 2 13 x 2 14 x 4 15 x 1 16 x 2 17 x 1 18 x 1 19 x 2 20 x 2 21 x 2 22 x 1 23 x 1 24 x 2 5/37
25 x 2 26 x 2 27 x 2 28 x 1 29 x 1 30 x 2 31 x 2 32 x 2 33 x 2 34 x 2 35 x 2 6/37
Ax8 1 Insert quickfit screw(A) into corresponding holes in plate #11 with a screwdriver as shown. A A A A A A A 11 A Bx8 2 A 11 Ex6 Connect two plate #12 with plate #11 using wooden dowel(E), put cam lock(B) into plate #12 and turn clockwise to tighten as shown.
CL x 1 Ax2 3 CR x 1 Kx4 3 x 12mm Fix slide rail(CL) and (CR) to plate #9 and #10 respectively using screw(K) as shown. Insert quickfit screw(A) into plate #9 and #10 with a screwdriver as shown.
4 Bx2 Ex2 Connect plate #9 and #10 with plate #18 using wooden dowel(E), put cam lock(B) into plate #18 and turn clockwise to tighten as shown.
Ex4 5 Lx4 4 x 30 mm Connect the two components(assembled in step 2 and 4) with wooden dowel(E), then fix with screw(L) as shown.
A x 10 6 Insert quickfit screw(A) into corresponding holes in plate #7 and #8 with a screwdriver as shown.
7 Bx5 Ex4 Connect the component (assembled in step 5) with plate #8 using wooden dowel(E) at first. I II III Put cam lock(B) into plate #11 and #12, turn clockwise to tighten as shown.
Bx5 8 Ex4 Connect plate #7 with the component using wooden dowel(E), put cam lock(B) into plate #11 and #12, turn clockwise to tighten as shown.
Ex1 9 Connect two plate #34 with plank #35 at first. Slide plate #33 and #34 into available grooves as shown.
A x 16 10 A A A A A 180° 4 A A A 4 Insert quickfit screw(A) into corresponding holes in both sides of plate #4 and #5 as shown.
Ex4 Bx4 11 B 13 13 13 180° 5 Connect two plate #13 with plate #5 using wooden dowel(E), put cam lock(B) into plate #13, turn clockwise to tighten as shown. B B B B 5 E E 12 Ex4 Bx4 4 4 32 E E 180° B B B B 13 B 13 13 Slide plate #32 into available grooves at first. Attach plate #4 to two plate #13 with wooden dowel(E), put cam lock(B) into plate #13 and turn clockwise to tighten as shown.
Ax8 13 Insert quickfit screw(A) into corresponding holes in plate #2 and #3 as shown.
Bx8 14 Ex8 Attach four plate #14 to plate #4 and #5 respectively with wooden dowel(E), put cam lock(B) into plate #14 and turn clockwise to tighten as shown.
15 Bx8 Ex8 Attach plate #2 and #3 to plate #14 respectively with wooden dowel(E), put cam lock(B) into plate #14 and turn clockwise to tighten as shown.
16 Connect two plate #31 with plank #35 at first. Slide plate #31 into available grooves as shown. 31 35 3 5 31 4 2 31 35 31 A x 12 17 A A 1 A A A A A A A A A 1 A Insert quickfit screw(A) into corresponding holes in plate #1 as shown.
B x 12 18 Ex8 Cover plate #1 to the top of the component with wooden dowel(E), put cam lock(B) into plate #2,#4,#5,#3, and turn clockwise to tighten as shown.
19 30 Slide plate #30 and #32 into available grooves at first. 32 30 2 3 A x 14 20 A A 6 A A A A A A A A A A A 6 A Insert quickfit screw(A) into corresponding holes in plate #6 as shown.
Ex8 21 Lx8 4 x 30 mm Cover plate #6 to the bottom of the component with wooden dowel(E), and fix using screw(L) as shown.
CR x 1 CL x 1 22 Kx4 3 x 12mm CR 17 17 CL 17 K K 17 K K Fix slide rail(CL) to plate #17 with screw(K) as shown. Fix slide rail(CR) to another side of plate #17 with screw(K) as shown. CR K 23 Bx2 Ex2 E B 6 17 E Attach plate #17 to plate #6 with wooden dowel(E), put cam lock(B) into plate #17 and turn clockwise to tighten as shown.
24 Mx2 Tx2 4 x 12mm Fix part(T) to plate #1 with screw(M) as shown.
B x 12 25 Lx1 Ex8 4 x 30 mm Connect the two components (assembled in step 9 and 24) with wooden dowel(E), put cam lock(B) into plate #7,#9,#10,#8, and turn clockwise to tighten as shown. 3 I II Fix plate #17 with plate #18 using screw(L) as shown. Requires more than two people to assemble.
Q x 12 26 R x 12 3 x 16mm Reinforce back plate using part(R) with screw(Q) as shown.
N x 12 27 Insert part(N) into corresponding holes in plate #4,#5,#7,#9,#10 and #8, then place plate #15 and #16 in as shown.
Bx8 Ax8 28 Fx2 Lx8 Hx2 4 x 30 mm 4 x 16 mm Insert quickfit screw(A) into plate #28 and #29,fix knob(F) with screw(H) as shown. H 28 A A F A A 28 24 A A L F A Connect plate #25 and #26 with plate #24 using screw(L) as shown. H 25 L L H A 24 29 26 L x2 25 L F Slide plate #27 into available slots at first. Attach plate #28 and #29 respectively to the drawer component, put cam lock(B) into plate #25 and #26 and turn clockwise to tighten as shown.
29 DR x 2 DL x 2 Kx8 3 x 12mm K DL K K DR K 26 DR 28 26 Fix runner(DL) and (DR) to plate #25 and #26 with screw(K) as shown.
30 Slide drawers into corresponding positions.
S x 10 31 J x 20 Gx4 Hx8 4 x 16 mm 4 x 14mm Fix hinge(S) to plate #19 and #20 using screw(J) as shown. Fix handle(G) to plate #19 and #20 using screw(H) as shown.
Sx8 32 J x 16 Gx4 4 x 14mm Hx8 4 x 16 mm Fix hinge(S) to plate #21, #22 and #23 using screw(J) as shown. J J x2 S J S J S H H 21 21 G Fix handle(G) to plate #21,#22 and #23 using screw(H) as shown.
33 J x 32 4 x 14mm Fix door plate #21 to plate #7 and #8; door plate 22 to plate #9; door plate 23 to plate #10 by fixing hinge with screw(J) as shown.
34 J x 40 4 x 14mm Fix door plate #19 to plate #2 and #3; door plate 20 to plate #4 and #5 by fixing hinge with screw(J) as shown.
35 If there is misalignment after you install, adjust the screw to the best condition 36/37
Lx2 36 Px2 4 x 30 mm Drill holes on your wall, and install anti-tipping device as shown.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
