Version: 210095-03-24A-HC
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 53 B x 53 C x 44 D x 48 CRA0635A CRB1295A CRC0540A CRD0312A Ex5 Fx5 G x 10 Hx2 Lx5 Power plug x 1 CRE0416A Jx3 CL CRE0620A CR DL DR WX0812A 3/22
1 30 26 33 5 18 17 4 1 18 33 20 19 18 6 22 21 23 27 7 33 10 8 13 32 11 x2 9 28 11 3 1 34 14 29 15 11 2 13 12 31 16 24 25 ALWAYS install tipover restraint provided. NEVER put a TV on this product. NEVER allow children to stand,climb or hang on drawers,doors,or shelves. NEVER open more than one drawer at a time. Place heaviest items in the lowest drawers. This is a permanent label.
Ax2 1 D x 10 Gx4 Lx5 CL CR CRA0635A CRD0312A WX0812A E D CL E CR Fix slide rail(CL) and (CR) to board 28 and 12 respectively with screw(D) as shown. D D D E 28 E CL CL D D CL D D CL D CL 28 G 28 G A G 12 D D CR A A 12 Screw eccentric rod(A) into board 12 with a screwdriver as shown. Knock foot peg(G) into bottom of board 28 and 12.
Ax2 2 D x 10 Gx2 Kx5 CL CR CRA0635A CRD0312A D 29 WX0812A E CL E CR E CR E D D D CR D D CR D D CR D CR 29 180° D D A A CL 29 Fix slide rail(CR) to board 29 with screw(D) at first. Flip the board to back, fix slide rail(CL) and screw eccentric rod(A) into as shown. Knock foot peg(G) into bottom of board 29.
3 Cx4 CRC0540A Connect board 28 and 29 to board 15 and 16, and fix with screw(C) as shown.
4 Bx4 Cx8 CRB1295A CRC0540A 14 B 29 B 13 180° C 12 C C 13 C C C 14 B 28 B B B C C 13 12 C C 29 Connect board 12 and 29 to board 14, add cam lock(B) into board 14 and turn clockwise to tighten as shown. Connect board 12 and 29 to board 13, and fix with screw(C) as shown.
5 Insert board 32 along available grooves as shown.
Bx6 Ax6 6 CRA0635A CRB1295A A 27 A A A A A A 27 Screw eccentric rod(A) into board 27 at first. Attach board 27 to the top, add cam lock(B) into board 28,29,12 and turn clockwise to tighten as shown.
A x 20 7 CRA0635A A A 2 A A A A A 2 A A A 5 Screw eccentric rod(A) into board 2, 5, 6 and 8 at first.
8 B x 20 Ex5 CRB1295A CRE0416A Fx5 F B B E 11 2 2 34 1 B 1 B B 180° B F 6 E B B E F 5 11 B B 1 B B E 6 11 1 33 33 F x2 B B Attach board 11 and 1 to board 2/5/6, add cam lock(B) and turn clockwise to tighten as shown. x2 B B Attach board 10 and 9 to board 8, 10 add cam lock(B) and turn clockwise to tighten as shown. Insert board 34 and 33 along 33 available grooves as shown. Fix knob(F) to drawer face with screw(E).
9 C x 20 CRC0540A 1 C C C 2 11 3 C C 1 Fix board 3, 4 and 7 to corresponding drawers with screw(C) as shown.
D x 20 10 Lx5 DL DR CRD0312A WX0812A E E DL D D E DL 2 1 D 3 E DR D DR 11 D D D 5 DL DR D DR 1 11 4 11 D D 1 6 DL D Fix runner(DL) to board 1 and 9 with screw(D) as shown. Fix runner(DR) to board 11 and 10 with screw(D) as shown.
11 5 2 Insert drawers in.
12 A x 13 CRA0635A A AA A A A 19 19 180° A A A A 19 A A A A 23 Screw eccentric rod(A) into board 19 and 23 at first. 13 B x 10 CRB1295A Connect board 23 and 19 to board 20, 21 and 22, add cam lock(B) into and turn clockwise to tighten as shown.
14 Cx1 CRC0540A C 22 20 21 19 C 21 15 22 23 Fix board 22 to board 21 with screw(C) as shown. Ax3 CRA0635A A Screw eccentric rod(A) into board 17 at first.
16 Bx6 CRB1295A Connect board 17 and 19 to board 18, add cam lock(B) into and turn clockwise to tighten as shown. 18 B 17 B 18 B B 19 18 18 B 17 B 180° 17 B Cx3 CRC0540A C 26 26 18 C 18 C 18 17 19 C 18 Fix board 26 to board 18 with screw(C) as shown.
Bx7 Ax7 18 CRB1295A CRA0635A AA A AA A A 27 A A 27 Screw eccentric rod(A) into board 27 at first. 23 B 180° 17 26 19 B B 23 B BB B 27 B B 27 Connect the two components, add cam lock(B) into and turn clockwise to tighten as shown.
19 Jx3 CRE0620A 20 30 Fix board 20 to mirror using the screw(J) as shown.
Cx8 20 CRC0540A C C 24 C C 24 C C C C 25 25 C 24 C C 25 Fix board 25 to board 24 with screw(C) as shown. Dx8 21 Hx2 Gx4 CRD0312A Knock foot peg(G) into bottom of board 25. G G G Fix part(H) to board 24 and 31 with screw(D) as shown.
Power plug x 1 Connect the power cable with light connectors. 30 Touch lightly to change color, press and hold to adjust the brightness.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
