Installation Instructions

Outdoor Software Defined Radio (OSDR) platform
Installation & Cabling Manual - Edition 3.0
109
Outdoor AC PoNE, Continued
Pole and wall installation procedure, continued
Step Action
4 Perform the following:
A: Set both keys over the sealing nut as shown below. Use the hexagon 24
mm tool to prevent the body receptacle from rotating and loosening.
B: Use the adjustable torque U-wrench to screw the sealing nut to body.
Do not over tighten. Adjust the tool for maximum tightening torque 6 Nm.
Take care when you unplug the RJ-45 jack. The latter is locked into the mating
receptacle and must be extracted first (with the tip of a flat-headed screwdriver)
after removing the gland parts from the lower part of PoNE.
Continued on next page