Installation Instructions

Appendix D: Cables Termination

116

Ethernet Cable, Continued

Ethernet cable

termination

procedure

To terminate the cable, proceed as follows:

Step

Action

1 Perform the following:

For termination type A:

Strip 40 mm of outer jacket.

For termination type B:

Strip 80 mm of outer jacket.

B: Fold shield back (over the jacket).

For termination type A:

Twist shield wires together and allow 10 mm of shield to

surround jacket’s end.

For termination type B:

Twist shield wires together and allow 20 mm of shield to

surround jacket’s end.

D: Completely remove the exposed foil.

For termination type A:

For termination type B:

Continued on next page