Installation Instructions
4. Installation Procedures
60
Sectoral and Parabolic Antenna, Continued
Procedure, continued
Step Action
11
To correct the antenna verticality with respect to the ground, perform the following
actions:
A:
Place the inclinometer, as shown below:
B:
Rotate (left-right) the radio unit till the inclinometer digital indicator reaches 0
degrees.
12
Remove the OSDR.
13
Tighten the three M10 nuts (see step 9).
DO NOT remove the XPOL tool.
• Do not over tighten.
• For maximum tightening torque please follow the antenna installation leaflet
(available in package).
Continued on next page