Installation Instructions

4. Installation Procedures
62
Sectoral and Parabolic Antenna, Continued
Procedure, continued
Step Action
16
Remove the OSDR and the XPOL tool.
17
Install the OSDR onto the antenna as described to steps 5, 6 and 7.
18
Use the U-wrench tool to perform azimuth adjustment
(1)
, as shown below.
• Do not over tighten.
• For maximum tightening torque please follow the antenna installation leaflet
(available in package).
End of procedure for sectoral 26/28/32 GHz.
Continued on next page
(1)
The values must be taken from RF planning team.