Manualshelf

Installation Instructions

ManualsBrandsWiBAS ManualsElectronicsPoint-to-Multipoint Gigabit Radio 28 GHz (TS)
61626364656667686970
Outdoor Software Defined Radio (OSDR) platform
Installation & Cabling Manual - Edition 3.0
63
Sectoral and Parabolic Antenna, Continued
Procedure, continued
Step Action
19
Install the OSDR onto the antenna as described to steps 5, 6 and 7.
20
To correct the elevation angle for matching with the RF planning data, perform the
following actions:
A:
Place the inclinometer, as shown below.
B:
Use the U-wrench tool to perform elevation adjustment, as shown below.
Perform adjustment till the inclinometer reaches the desirable RF
planning value.
C:
All elevation nuts and bolts should be tightened.
• Do not over tighten.
• For maximum tightening torque please follow the antenna installation
leaflet (available in package).
Continued on next page