User Manual
6. Equipment Commissioning
48
WiBAS-OSDR TS, Continued
Procedure for WiBAS-OSDR TS with Parabolic Integrated Antenna, continued
Step Action
3 Perform fine alignment, as follows:
•
Use the spanner key to loosen the azimuth adjustment bolts
(A1).
Perform azimuth
adjustment by rotating the bolts
(A2)
of the antenna mounting kit until the voltage readout
reaches a desired level.
•
Use the spanner key to loosen the elevation adjustment bolts
(E1).
Perform elevation
adjustment by rotating the bolt
(E2)
of the antenna mounting kit until the voltage readout
reaches a desired level.
The RSSI voltage (actually the voltmeter value) provides a direct relationship with
RSL.
For Wibas-OSDR see
WiBAS-OSDR terminal station RSSI measurement calculation
formula on page 41,
For WiBAS-Connect see WiBAS-Connect terminal station RSSI measurement
calculation formula on page 41).
Pre-tightened.
The final tightening torque will be applied after alignment process completion.
Continued on next page