User's Guide

Development Kit User Guide – Rev11.0
33
Log Messages
The Log Messages section allows users to view and download separate log files for the
Transmitter and Onboard Charger – typically for troubleshooting with assistance from
WiBotic.
The “System Log” file contains a chronological record of all system events since the
Transmitter was last powered on. It is similar to the Live Log above, but the System Log
file is not date/time stamped and is not affected by closing the browser. The most recent
event is listed at the bottom of the log file.
The numbered log files relate to each charging session for the Transmitter and Onboard
Charger. There is currently a limit of 101 (0-100) individually recorded cycles with
numbering starting at 0 again after the 100th record is saved. Therefore the “Log 0” file
may not be the most current set of system data. The most current logs are shown at the
top of the list. If detailed analysis of the log files is required, all of the available logs can
be downloaded at once using the “Download All Log Files” link.
“Update” Menu
WiBotic will occasionally release new firmware for the Transmitter or Onboard Charger
to improve system performance. Beginning with Rev 8 of WiBotic firmware, users can
check to see if a more recent version is available. To do this, simply click on the black
“Check for Updates” button near the top of this page.
The following screen will appear to advise you of your current firmware status. The left
side shows your current firmware version and related files (API Docs, User Guide, etc.)
are available for download in case you haven’t already received them.
The right side will show all versions of firmware that are more current than the version
currently running on your system. If there is a direct upgrade path to the most current