User's Guide

Development Kit User Guide – Rev11.0
8
Specifications
All WiBotic Wireless Power systems share the following standard specifications:
PARAMETER
RANGE
Wireless Power Operating Frequency
6.78 ± 0.015 MHz
Communication Link Frequency
2.433 - 2.483 GHz
Ambient Operating Temperature
0° to 40° C
Transmitter AC Input Voltage*
90 - 264 VAC
Transmitter AC Input Frequency
50 – 60 Hz
Transmitter Data Port
Ethernet (RJ45)
Transmitter Data Communications
WiBotic API via WebSockets
Onboard Charger Auxiliary DC Input Voltage
22 - 50 VDC (48V preferred)
Onboard Charger Data Communications
WiBotic UAVCAN API over CAN-
bus
*The standard WiBotic Development Kit includes an AC/DC power supply built into the transmitter. Direct
DC input versions are also available. Contact WiBotic for details.
Power Level
Development Kits are available in configurations that combine Transmitters and
Onboard Chargers to provide the best combination of size, weight and power for each
application. The following table shows the available combinations for each desired
power level. All systems utilize the same 200mm Transmitter and 100mm Receiver
antenna coils unless custom antenna sizes/shapes are requested.
Up to:
90W
125W
250W
300W
Transmitter
TR-110
TR-110
TR-300
TR-300
Onboard Charger
OC-110
OC-210
OC-250
OC-300
Onboard Chargers (OCs) are paired with the correct Transmitter to achieve their
maximum power level, so the OC ultimately determines the amount of power delivered
to the battery. Each OC has a different maximum power level (watts), maximum current
level (amps), and output voltage range as shown in chart below: