User’s Manual and Laser Safety Guide www.wickedlasers.
FOREWORD First and foremost, we are laser enthusiasts. We desire nothing more than to achieve perfection in our craft. For us, pushing the limits of technology is part of our daily routine. It’s only impossible if we don’t try. As we continue to advance in our search for perfection, we’ve set benchmarks for others to follow and new limits for us to test. This is our mission. We plan to continually push the boundaries of technology and create products that challenge the imagination far into the future.
Table of Contents We wanted to create the world’s most powerful handheld laser - we succeeded and inadvertently set a world record in doing so. We are extremely proud to be included in the Guinness Book of World Records for 2007. This will serve as a testament to our commitment to providing the world with the most sophisticated laser products technology can offer. Designed and developed by some of the world’s best engineers, the Spyder Series stands at the pinnacle of laser technology.
WWW.WICKEDLASERS.COM The S3 Arctic Series The S3 Spyder III Arctic is the most powerful handheld laser you can legally own. It’s got a cool-blue, but blazing-hot, 1W laser beam. ●● Completely legal laser power. The 1000 mW output power of the blue laser beam is able to burn through balloons, plastic, and much more. ●● 100% unlimited duty cycle. Operate the laser continuously, 24/7 with no risk of damaging the laser diode. ●● Strong laser in a strong body.
WWW.WICKEDLASERS.COM Technical Specifications Model Name: Laser Product Class: Wavelength: Lasing Medium: Laser Type: Laser Power: Beam Diameter: Beam Divergence: Size: NOHD* Beam Distance 0.25 Lux Required Eyewear O.D. Power Consumption: Battery Lifetime: Weight: Laser Body: Power supply: Switch: Modes: Duty Cycle: Expected lifetime: Warranty: S3 Arctic Series 4 445nm nominal center λ GaN Direct Diode < 1 Watt (750mW nominal) 5.0mm 1.5mRad 228mm x 35.8mm 149 meters 6,856 meters 3.0+ 3.
WWW.WICKEDLASERS.
WWW.WICKEDLASERS.COM How To Use The SmartSwitch™ 2.0 How To Use The SmartSwitch™ 2.0 The S3 Series are the world’s first and only hand held lasers equipped with SmartSwitch™ technology. SmartSwitch™ combines both safety and intelligence by requiring the user to follow a protocol of simple clicks and click/ holds to operate the device. Once unlocked, the laser runs in low power strobe mode (18Hz strobe) which is the default setting designed for safety.
WWW.WICKEDLASERS.COM How To Use The SmartSwitch™ 2.0 How To Use The SmartSwitch™ 2.0 SmartSwitch™ 2.0 Codes: ➡ the Power Button on the 1 Push Tailcap to turn on your laser. The first LED will start flashing indicating the laser is ready to be unlocked. ➡ WICKED LASERS 2010 Pro Series | 10 FLASHING FLASHING ➡ ▪ A long hold (holding down briefly for less than a second) cycles between high power and low power. ▪ A short hold cycles Strobe mode to Continuous Wave mode.
WWW.WICKEDLASERS.COM How To Use The SmartSwitch™ 2.0 ➡ ➡ ➡ FLASHING FLASHING Using Your Laser FLASHING FLASHING FLASHING ➡ ➡ down the button briefly down the button briefly 5 Hold 6 Hold and the second and third again and all three LED’s will LEDs will start flashing. flash three times, then goes into battery indicator status. Code sequences should be performed consecutively otherwise it will reset if you pause in between clicking or holding for too long.
WWW.WICKEDLASERS.COM Using Your FDA Compliant Endcap Safety and Maintenance CAUTION - Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. 1. No scheduled maintenance necessary to keep the product in compliance. Simply keep the laser free from dust or other contaminates that could cloud or dirty the laser lens or crystal array and operate within recommended parameters. 2.
WWW.WICKEDLASERS.COM Class 4 Laser Safety Instructions DANGER CLASS 4 LASER : All visible lasers with beams over 500 milliwatts (1/2 watt) are classified as Class 4. EXTREME DANGER, MUST BE USED CAREFULLY DO NOT USE AS A LASER POINTER. ● DO NOT USE AS A TOY. ● ONLY FOR USE BY PERSONS UNDERSTANDING THE HAZARDS OF THIS LASER. ● READ ALL WARNINGS ON THIS PAGE.
WWW.WICKEDLASERS.COM Class 4 Laser Safety Instructions DO NOT LOOK OR STARE AT DIFFUSED REFLECTIONS DO NOT BURN OR DAMAGE MATERIALS DO NOT SHINE BEAM ON SKIN - BURN HAZARD DO NOT AIM AT AIRCRAFT OR STARS Looking at the laser “dot” can cause eye damage. Danger is higher when on white surfaces and at close range. DO NOT USE THIS AS A LASER POINTER. The direct or reflected beam can burn exposed skin. Wear protective, light-colored clothing. Do not aim beam at your skin, skin of other persons, or animals.
WWW.WICKEDLASERS.COM Class 4 Laser Safety Instructions AVOID EXPOSURE TO BLUE LIGHT Blue laser light can cause photochemical eye damage. Avoid prolonged exposure to blue light (light from 530nm green to 380 ultraviolet can be hazardous, with the peak danger at 440nm blue). There is a hazard even from prolonged exposure to diffuse “room glow” from the beam reflecting off walls or other surfaces. Use safety glasses that block blue light.
WWW.WICKEDLASERS.COM Lens Cleaning Procedure and Troubleshooting Types of Common Lens Problems What you need : Procedure : 1. Dirty Lens - The most common problem with your laser 1. Microfiber Cloth - Please make 1. Wash your hand with soap and water. Make sure to dry them properly. sure the microfiber cloth is specifically designed for cleaning lenses. You can find this at your local camera or glasses store. 2.
WWW.WICKEDLASERS.COM Types of Common Lens Problems Types of Common Lens Problems 4. Moisture - We do not recommend using any laser products in highly humid or foggy conditions. If your laser unit is used in these conditions and/or submerged in water, the beam may appear similar to the above picture. You will not be able to clean this as water has condensed inside the lens and/or crystal set. This condition can be repaired by Wicked Lasers, however, will not be covered in your warranty.
WWW.WICKEDLASERS.COM Limitation of Liability Manufacturer’s Warranty In no event shall Wicked Lasers or any of its subsidiaries or affiliates be liable for any indirect, special, incidental or consequential injury to persons or damage to property caused by the use of any of our products. By purchasing from Wicked Lasers, you hereby indicate that you understand and agree to the following: All Spyder III Series lasers come with a standard 12 Month Manufacturer’s Warranty.
Manufacturer’s Warranty This warranty does not include defects or damages attributable to misuse, normal surface weathering, or damages caused by accidents or fire or other casualty or force majeure or any other causes or occurrences beyond the manufacturer’s control. To claim your warranty, please send this form or email support@wickedlasers.
1-877-952-7377 Unit 1010, Miramar Tower, 132 Nathan Road, Tsim Sha Tsui Kowloon, Hong Kong www.wickedlasers.com | support@wickedlasers.
