User’s Manual and Laser Safety Guide www.wickedlasers.
FOREWORD First and foremost, we are laser enthusiasts. We desire nothing more than to achieve perfection in our craft. For us, pushing the limits of technology is part of our daily routine. It’s only impossible if we don’t try. As we continue to advance in our search for perfection, we’ve set benchmarks for others to follow and new limits for us to test. This is our mission. We plan to continually push the boundaries of technology and create products that challenge the imagination far into the future.
Table of Contents We wanted to create the world’s most powerful handheld laser - we succeeded and inadvertently set a world record in doing so. We are extremely proud to be included in the Guinness Book of World Records for 2007. This will serve as a testament to our commitment to providing the world with the most sophisticated laser products technology can offer. Designed and developed by some of the world’s best engineers, the Spyder Series stands at the pinnacle of laser technology.
WWW.WICKEDLASERS.COM The Krypton Series We may have finally gone too far... introducing a laser beam that can literally light-up the stars. Under review by Guinness World records, the S3 Spyder III Krypton is the world’s brightest handheld laser. Our Earth’s atmosphere ends at 62 miles but the Krypton, goes beyond as it breaks through our atmosphere, into outer space. With it’s extreme range of 85 miles (@ 0.25 lux), the S3 Krypton is the first and only handheld laser visible from outer space.
WWW.WICKEDLASERS.COM Technical Specifications Model Name: Laser Product Class: Wavelength: Size: Weight: Laser Body: Laser Finish: Transverse Mode: Max Power: Min Power: Beam Divergence: Beam Diameter: NOHD* Required Eyewear O.D. Power Consumption: Power supply: Battery Lifetime: Switch: Modes: Duty Cycle: Expected lifetime: Warranty: S3 Krypton Series | 4 S3 Krypton Series 4 532nm 257.7mm x 35.
WWW.WICKEDLASERS.COM The Krypton Diagram The Krypton Diagram Removable Lens Protector FDA Compliant Endcap Removable Lens Protector FDA Compliant Endcap Laser Aperture SmartSwitch Button Contact Guard Power Button WARNING: Extremely dangerous is an understatement to 1 Watt of laser power. At close range, this Class 4 beam will cause immediate and irreversable retinal damage. Use with extreme caution and use only when wearing proper safety goggles with an O.D. of 3+ is required and 4.
WWW.WICKEDLASERS.COM FDA Compliant Endcap Diagram Screw Contact Guard Screw S3 Krypton Series | 8 How To Use The SmartSwitch™ 2.0 Safety Interlock The S3 Series are the world’s first and only hand held lasers equipped with SmartSwitch™ technology. SmartSwitch™ combines both safety and intelligence by requiring the user to follow a protocol of simple clicks and click/ holds to operate the device.
WWW.WICKEDLASERS.COM FLASHING ➡ ➡ ➡ the Power Button on the Click (short hold) the (short hold) the button 1 Push 3 Click Tailcap to turn on your laser. 2 SmartSwitch™ button. After again. The first and second The first LED will start flashing indicating the laser is ready to be unlocked. S3 Krypton Series | 10 the first click the first LED will be ON and the second LED will start flashing. LEDs will be steady and the third LED will start flashing.
WWW.WICKEDLASERS.COM How To Use The SmartSwitch™ 2.0 How To Use The SmartSwitch™ 2.0 To summarize: This is the first code you should remember three short holds + two long holds (holding the button down briefly for less than 1 sec.) will let you unlock the laser. Once the power is on, the user can toggle between the different active modes all available in low power and high power: Strobe, Continuous wave, SOS and Beacon mode with a few simple clicks.
WWW.WICKEDLASERS.COM Using Your Laser Using Your FDA Compliant Endcap (+) At the back of the laser, rotate endcap counter clockwise to open. Insert one Li-Ion Type 18650 IMR rechargeable battery negative (-) end first. Push the button located on the tail cap to operate laser. Removing the Safety Interlock from the Endcap will disable the laser. Another way to disable the laser is by unscrewing the Contact Guard as shown here. Remove screws to detach Contact Guard and disable the laser.
WWW.WICKEDLASERS.COM Class 4 Laser Safety Instructions Class 4 Laser Safety Instructions DANGER CLASS 4 LASER : All visible lasers with beams over 500 milliwatts (1/2 watt) are classified as Class 4. DO NOT SHINE DIRECT BEAM IN EYE-BLINDNESS HAZARD! The direct beam at close distance can cause instant blindness. The direct beam up to 250m/750ft can cause eye damage. Never aim any laser towards a personʼs head, or where a person may suddenly appear. Never aim towards a pet or other animal.
WWW.WICKEDLASERS.COM Class 4 Laser Safety Instructions DO NOT BURN OR DAMAGE MATERIALS AVOID EXPOSURE TO BLUE LIGHT DO NOT AIM AT AIRCRAFT OR STARS WEAR SAFETY GLASSES The beam can char, burn or ignite materials. Especially avoid dark, thin, and combustible materials such as fabrics. The bright light from this laser can flashblind or distract a pilot. NEVER AIM ANY LASER TOWARDS AN AIRPLANE OR HELICOPTER. Always be careful any time the beam goes into the sky.
WWW.WICKEDLASERS.COM Class 4 Laser Safety Instructions OTHER IMPORTANT SAFETY AND USE CAUTIONS: DO NOT USE AS A LASER POINTER. This Class 4 laser is too bright to be safely used for laser pointing purposes. NOT FOR CHILDREN OR UNAWARE PERSONS. The user must be mature, and must be aware of the direct and reflected beam hazards to eyes, skin, materials and aircraft. DO NOT USE ILLEGALLY. Many countries and jurisdictions have laws regarding laser usage. Follow all local laws. DO NOT AIM AT VEHICLES.
WWW.WICKEDLASERS.COM Lens Cleaning Procedure and Troubleshooting Types of Common Lens Problems What you need : Procedure : 1. Dirty Lens - The most common problem with your laser 1. Microfiber Cloth - Please make 1. Wash your hand with soap and water. Make sure to dry them properly. sure the microfiber cloth is specifically designed for cleaning lenses. You can find this at your local camera or glasses store. 2.
WWW.WICKEDLASERS.COM Types of Common Lens Problems Types of Common Lens Problems 4. Moisture - We do not recommend using any laser products in highly humid or foggy conditions. If your laser unit is used in these conditions and/or submerged in water, the beam may appear similar to the above picture. You will not be able to clean this as water has condensed inside the lens and/or crystal set. This condition can be repaired by Wicked Lasers, however, will not be covered in your warranty.
WWW.WICKEDLASERS.COM Limitation of Liability Manufacturer’s Warranty In no event shall Wicked Lasers or any of its subsidiaries or affiliates be liable for any indirect, special, incidental or consequential injury to persons or damage to property caused by the use of any of our products. By purchasing from Wicked Lasers, you hereby indicate that you understand and agree to the following: All Spyder III Series lasers come with a standard 12 Month Manufacturer’s Warranty.
Manufacturer’s Warranty This warranty does not include defects or damages attributable to misuse, normal surface weathering, or damages caused by accidents or fire or other casualty or force majeure or any other causes or occurrences beyond the manufacturer’s control. To claim your warranty, please send this form or email support@wickedlasers.
1-877-952-7377 Unit 1010, Miramar Tower, 132 Nathan Road, Tsim Sha Tsui Kowloon, Hong Kong www.wickedlasers.com | support@wickedlasers.
