User manual

WideFly Ltd. WF28 User Manual
http://www.widefly.com rev 1.1
P.8
Admin Login & Default Mode
A brand new WF28 is pre-configured to run as admin mode. All features can be accessed without restriction.
To configure default boot up mode, follow the steps below:
Admin Login
 Open battery cover
 Locate the reset button (near top left hand corner of battery)
 Turn off PDA
 Press and hold power key, then quickly lightly press the reset button
 Keep holding the power key for 1 seconds and release
 Admin login screen is shown
 Default admin password is 12345678 (password can be changed by
administrator)
NOTE: Admin password should not be disclosed to end users.
Admin Menu
 At the bottom screen, it shows “Default mode is admin”. Therefore,
every reboot of PDA would start as admin mode
 To change default mode as user, select “Change default mode”
 If administrator needs to go to user mode once to examine the user
mode settings, simply tap “Start OS (User Mode)”. Note that this will
not change the default mode.
 Similarly, if default mode is user, administrator may go to admin mode
once by tapping “Start OS (Admin Mode)”